*mymedicalexpo

CG Range Leaflet

Product catalog summary

Overview: The document describes the features and specifications of Peak Scientific's Calibration Gas Generators, specifically the CG15L and CG22L models. These generators are designed to produce high-purity calibration gas for emissions monitoring and analysis, meeting the Federal Register Specification 40CFR 86.114-79.

Specifications:

Models: CG15L and CG22L
Calibration Gas Flow Rate: 15 L/min for CG15L and 22 L/min for CG22L
Pressure Dewpoint: -70°C / -94°F
Required Inlet Air Pressure: 4-8 bar
Required Inlet Flow: 27 L/min for CG15L and 44 L/min for CG22L
Warm-Up Time: 30 minutes for specified THC
Gas Outlets: 1x 1/4” BSP Female
Electrical Requirements: 220v 4.5A / 120v 5.0A for CG15L and 220v 8.8A / 120v 9.5A for CG22L
Power Consumption: 1100 watts at 220v / 540 watts at 120v for CG15L and 2090 watts at 220v / 1056 watts at 120v for CG22L
Dimensions: CG15L - 62 x 43 x 41 cm / 24 x 17 x 16 ins; CG22L - 88 x 43 x 41 cm / 35 x 17 x 16 ins
Weight: 58 kg / 128 lbs for CG15L and 73 kg / 161 lbs for CG22L

Features & Benefits:

Qualified: Meets Federal Register Specification 40CFR 86.114-79
Purity: Provides continuous high-purity calibration gas
Durable: Minimal maintenance with few moving parts
Quiet: Operates silently
Mobile: Can be positioned flexibly as needed
Simple Installation: Requires only connection to air source and application
Economical: More cost-effective than other gas supply methods
Convenient: Provides gas on demand without health hazards or supply concerns

Maintenance and Ordering Information:

Annual Service Kit: CG Range 08-4703
Standard Maintenance Plan: 09-3110
Complete Maintenance Plan: 09-3010

Contact Information: For more details, visit www.peakscientific.com or contact Peak Scientific via email at [email protected].

Accreditations: Peak Scientific’s Quality Management System conforms to ISO:9001:2008.

Catalog excerpts

Calibration Gas Generators CG15L - 22L The gas produced by this range of generators exceeds performance levels of Zero Air and is ideal for a wide variety of air emission applications. Gas is generated by both catalytic oxidation and a proprietary regenerative sieve. Coalescing pre-filters and a final filter ensure continuous gas purity. The CG models are the choice for properly zeroing emissions gas analysers during calibration and meet the requirements of Federal Register Specification 40CFR 86.114-79. PEAK SCIENTIFIC. GO WITH THE FLOW.

Open the catalog to page 1

Calibration Gas Generators CG15L - 22L Features & Benefits: Qualified – Meets requirements of Federal Register Specification 40CFR 86.114-79 The CG Generators offer the purest source of calibration gas for your CO2 Analyzer, ensuring the cleanest possible starting point for emissions measurement, monitoring and analysis. Purity – Continuous high purity calibration gas for emissions monitoring Durable – Few moving parts with minimum maintenance requirements Quiet – Completely silent in operation Mobile – Flexibility to position generator where required Simple Installation – Generator only needs...

Open the catalog to page 2

All Peak Scientific Instruments catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list