AUTOMATIC MANIFOLD
12Pages

28950 Moraleja de En medio (Madrid) AUTOMATIC MANIFOLD Automatic Descompressive Manifold to 200bar until 8 bar composed by a set of high pressure coils, bottles collectors, ramp and reducing Manifold designed and manufactured by PEGISDAN Estamoi certificados

C/ Cobre, 5. Pol. Ind. San Millán 28950 Moraleja de En medio (Madrid) Tlf.+34 91 609 30 64 Fax +34 91 609 30 56 pegisdan@pegisdan.com DECOMPRESSIVE MANIFOLD WITH SELECTOR FOR AUTOMATIC FLOW 70 Nm3 / h Automatic Manifold for O2, N2O, compressed air at 5 and 8 bar, CO2 and He for a flow of 70 m3 / h, fully pneumatic operation and controlled by a control panel with display of 40x4, electric and battery powered in case of failure. It detects if the ramp is canceled, service, or on reserve. Main Features 200 bar 300 bar 8,5 bar Between 4 y 12 bar Less than 0,2 ml/min 2,5 bar -20°C to 70°C High...

C/ Cobre, 5. Pol. Ind. San Millán 28950 Moraleja de En medio (Madrid) Tlf.+34 91 609 30 64 Fax +34 91 609 30 56 pegisdan@pegisdan.com INLET VALVES HIGH PRESSURE 2 input valves (left and right) cutting and evacuation functions:  Shut off valve for ramp isolation (inclined valve)  Exhaust valve (bottom),  Automatic pressure 2-20 mmA,  Gauge Digital pressure t 0-300 bar and Gauge 60 mm diameter 0-316 bar for oxygen and compressed air, and 0 to 100 bar for N2O and CO2. Operation The lower valve positioned at 45 ° is the isolation valve to isolate the automatic ramp manifold, the valve...

28950 Moraleja de En medio (Madrid) Made by stamped brass with chrome finish. Ability to work with input 200 bar and a maximum of 300 bar and 8 bar output. Viton membrane incorporated with safety valve and pressure gauge valve maintenance. Maximum inlet pressure (P2) Regulated reduction Maximum internal loss Working Temperature Estamoi certificados

C/ Cobre, 5. Pol. Ind. San Millán 28950 Moraleja de En medio (Madrid) Tlf.+34 91 609 30 64 Fax +34 91 609 30 56 pegisdan@pegisdan.com SOURCE SELECTOR The source selector allows the passage of gas from a ramp or other automatically by a pressure difference of 2.5 bar. It also has a manual transmission in the case of change of source manually. Incorporates detector position to know the source that is supplying. Incorporates a pressure gauge 0 to 16 bar, a translator pressure switches 4 to 20mmA and microswitches positioning. Operation Before the pressure of one of the ramps drops under 2.5...

C/ Cobre, 5. Pol. Ind. San Millán 28950 Moraleja de En medio (Madrid) Tlf.+34 91 609 30 64 Fax +34 91 609 30 56 pegisdan@pegisdan.com ALARM AND CONTROL PANEL Control Alarm comprising microprocessor PIC18F458 • With LADDER programming language, • 5400 memory locations, • 4 opto-isolated digital inputs, • 3 analog inputs 0 to 5 volts, 1-5 volts or current mmA 0-5 or 4-20 mA, • 5 keys to opto input or TED functions (for hooter, etc.) • Acoustic signal output (hooter) • 4 leds octo-isolated status indication, • 1 4 x40 backlit display • BUS-CAN for communication with the host computer and...

C/ Cobre, 5. Pol. Ind. San Millán 28950 Moraleja de En medio (Madrid) Tlf.+34 91 609 30 64 Fax +34 91 609 30 56 pegisdan@pegisdan.com  Second row indicates to the right ramp, reporting the same thing on the left ramp.  Third row is for the information of the emergency ramp indicating the same information as the other ramp.  Fourth row is the on-going information regarding the power supply: o With electric power supply if the power is from the network, o No electric power if power is produced by battery due to a failure. o Other failures:  Failure source selector, which is not in the...

C/ Cobre, 5. Pol. Ind. San Millán 28950 Moraleja de En medio (Madrid) Tlf.+34 91 609 30 64 Fax +34 91 609 30 56 pegisdan@pegisdan.com The control panel provides bright and audible signals. TIPOS DE SEÑAL LUMINOSA Amber Led Normal power supply. Led Flashing Red Power over battery. Manifold malfunction. Green Led Manifold normal operation. The acoustic signal warns of any malfunction of the manifold. This can be silenced for 15 minutes, if the problem is not resolve, the acoustic signal works again. It can also sound again in case of another malfunction. Keypad with 5 buttons:  Test:...

C/ Cobre, 5. Pol. Ind. San Millán 28950 Moraleja de En medio (Madrid) Tlf.+34 91 609 30 64 Fax +34 91 609 30 56 pegisdan@pegisdan.com HIGH PRESSURE RAMP Horizontal ramp 1170 mm composed by high pressure header pipes 2, 3, 4 and 5 bottles and other gases and nitrous oxide. The input is done by thread (selective for nitrous N2O). Closing piston in the case of removing the coil from the bottle and as a backstop. Input filter particle retention for the case of one of the bottles has any solid impurities. The valves are connected together by high pressure pipes of diameter 12/6 mm by threads....

28950 Moraleja de En medio (Madrid) HIGH PRESSURE MANIFOLD BOTTLE COILS Copper Coil tube diameter high pressure 9/4 5 mm and 1 m long, curved with a radius of 160 mm with a twist of turns. Joints with brass cylinder and manifold welded silver alloy high quality thread specified COILS SCREWS GAS_BOTTLE SIDE_COLLECTOR SIDE The welding type is BAG-20 composed of 30% silver, 38% copper and 33% zinc Estamoi certificados

C/ Cobre, 5. Pol. Ind. San Millán 28950 Moraleja de En medio (Madrid) Tlf.+34 91 609 30 64 Fax +34 91 609 30 56 pegisdan@pegisdan.com COIL RAMP-MANIFOLD Coil copper tube diameter high pressure 9/4, 5mm and 650mm long, curved with a radius of 60 mm with a twist of 2.5 turns. There are both to the left and to the right. Joints with ramps and / or central brass, silver alloy welded high quality thread M21, 7x1, 814 to RIGHT, which facilitates the coupling between ramps decompressed manifold. The type of weld joint between the pipe and brass fittings BAG-20 is composed of 30% silver, 38% copper...

C/ Cobre, 5. Pol. Ind. San Millán 28950 Moraleja de En medio (Madrid) Tlf.+34 91 609 30 64 Fax +34 91 609 30 56 pegisdan@pegisdan.com COIL RAMP-RAMP Coil copper tube diameter high pressure 9/4, 5mm and 740mm long, curved with a radius of 60 mm with a twist of 2 turns. The maximum test pressure is 375 bar. Joints with ramps and / or central brass, silver alloy welded high quality thread M21, 7x1, 814 to RIGHT, which facilitates the coupling between ramps. The type of weld joint between the pipe and brass fittings BAG-20 is composed of 30% silver, 38% copper and 33% zinc. In the screws comes...