S P E C I F I C A T I O N S XRD Accessories Digital X-ray Flat Panel Detector Power Supplies, Frame Grabbers, and Cables PerkinElmer Digital X-ray Flat Panel Detectors (FPDs) require additional power supplies, frame grabbers and cables for optimum performance. Below you will find detailed descriptions of the accessories and charts that will explain which power supplies, frame grabbers and cables are compatible which each detector. Power Supplies The XRD power supplies are stand-alone units designed to support PerkinElmer’s FPDs. They support 100 V to 240 V at 50 Hz and 60 Hz. An LED display indicates the status of the device. The XRD EPS Power Supply is distinguished by its rugged design, versatility, and low ripple and humming voltage. The output voltages are stabilized across the load using voltage-sensing connections. Power Supply XRD EPS (XRD 0822, 1622, 1621) XRD LPM (XRD 1622) Electrical Input 100 – 240 V AC, 50/60 Hz, 2.9 – 1.1 A max, 215 W 100 – 240 V AC, 50/60 Hz, max 0.9 A, 40 W Output 5.4 V / 5 A DC, 12.5 V / 10 A DC, -12.5 / 5 A DC 13.7 V DC / 3 A Status light Power-On, Overload Power-on Cables AC (international), Detector power (various) 1.8 m long AC cable with an IEC 60320 C14 connector Mechanical Size 25 cm (l) x 8.3 cm (w) x 12.7 cm (h) 13.5 cm (l) x 8.0 cm (w) x 4.4 cm (h) Weight 3.1 kg 0.9 kg Housing Aluminum Plastic Environmental Temperature 0 – 70°C (operating), -10 – 70°C (transport) 0 – 40°C (operating / Derating 60°C), -25 – 85°C (transport) Humidity 5 – 90% RH (non-condensing) 5 – 90% RH (non-condensing) Ingress IP- 67 rated IP-67 rated, indoor-use only Vibration Meets IEC 60068- 6 (10 – 150 Hz, 0.5 g) n/a Shock Meets IEC 60068-27 (11 ms, 2 g) n/a Regulatory Standards UL- 60601-1, EN- 60601-1, IEC- 60950, EN-60950 UL- 60601-1, EN-60601-1, IEC- 60950, EN-60950 Regulations CE, RoHS, WEEE CE, RoHS, WEEE Note: PerkinElmer Digital X-ray Flat Panel Detectors and accessories are designed as components to be integrated into a complete X-ray system by imaging systems manufacturers. Manufacturers are responsible for qualifying, validating, certifying their intended use in their specific applications and meeting all applicable regulatory requirements established by country and local government authorities. Contents in this document are subject to change without notice.

Frame Grabbers (For use with XRD 1621 only.) The XRD Frame Grabber boards are used for controlling and acquiring 16-bit data images using PerkinElmer Digital X-ray Flat Panel Detectors (FPD). They connect to the FPDs with a optical fiber interface. Up to four frame grabbers, each using its own detector, can be connected to one PC. Frame Grabbers provide the advantage of synchronization between the detector and X-ray source or manipulator by using an external trigger signal or by using the internal trigger function of the frame grabber. It provides an FPGA and 256 MB RAM to perform on-board corrections...