POLYSITE® High Flow

Product catalog summary

Introduction
This document provides technical specifications and details for the POLYSITE® range of catheters and ports used in medical procedures such as chemotherapy, bone marrow transplantation, parenteral nutrition, and hematology. The products are designed for high flow venous access and are compatible with MRI procedures.

Specifications

Materials: The POLYSITE® range includes components made from titanium and polyoxymethylene (POM), with silicone septums. The catheters are available in silicone and polyurethane variants.
Sterilization: All components are sterilized using ethylene oxide.
Flow Rates: The average flow rate is specified in ml/min under a 1 m column of water, with specific rates provided for different gauge sizes (22G, 20G, 19G).

Catheter Characteristics

Silicone Catheters: External diameter of 3.18 mm, internal diameter of 1.57 mm, wall thickness of 0.8 mm, length of 600 mm, and internal volume of 0.22 ml/10 cm.
Polyurethane Catheters: External diameter of 2.8 mm, internal diameter of 1.6 mm, wall thickness of 0.6 mm, length of 600 mm, and internal volume of 0.23 ml/10 cm.

Port Characteristics

High Flow Ports: Made from titanium and POM, with a base diameter of 37.5 x 22.5 mm, port height of 12.1 mm, septum diameter of 12.1 mm, weight of 7.7 g, and internal volume of 0.55 ml.

Complete Set Content
The complete set includes a standard port, a radiopaque catheter, connecting rings, a straight Huber needle, a catheter introducer, a catheter rinse, an introducer, a J guidewire, a puncture needle, a tunneling device, and a syringe.

Conclusion
The POLYSITE® range offers versatile and high-performance solutions for various medical procedures requiring venous access. The products are designed to ensure compatibility with MRI and provide reliable performance under specified conditions.

Catalog excerpts

Comp INJECTIO atibles N OF CO ME N VENOUS HIGH FLOW HIGH FLOW POLYSITE® 4019 & 40010 - Hybrid: titanium and POM* Chemotherapy Bone marrow transplantation Parenteral nutrition Hematology Port characteristics References Port type/ Material With introducer Adult High Flow port Titanium/POM* Without introducer Septum Port height diameter (mm) (mm) 40010 Adult High Flow port Titanium/POM* Silicone catheters characteristics References 40010 40010 ISP 41010 41010 ISP Sheath introducer Flow rate** (ml/mn) 22G 4: 4000 series 1: polyurethane catheter 0: silicone catheter 1: pre-connected 0: no pre-connected 10: 10 F Polyurethane catheters characteristics References 4019 4019 ISP 4119 4119 ISP Sheath introducer Flow rate** (ml/mn) 22G COMPLETE SET CONTENT 1 • standard port in titanium and POM* with a silicone septum 1 • silicone or polyurethane radiopaque catheter (graduated every cm with a mark every 5 cm from 5 to 40 cm) 2 • connecting rings (only one for the pre-connected references) 1 • straight Huber needle (22G) 1 • catheter introducer 1 • catheter rinse (only one for non pre-connected references) 1 • x 9F or 10F introducer (with or without peal-away sheath) 1 • J guidewire (0,035” / 60cm) 1 • puncture needle 18G, 70 mm of usable length 1 • Ø 2,5 mm tunneling device, 23 cm length 1 • x 10ml syringe *POM: Polyoxymethylene **Average flow rate in ml/mn, under a 1 m column of water. The POLY SITE ® range is sterilized by ethylene oxide. POLY SITE ® is a registered trademark of PEROUSE MEDICAL.

Open the catalog to page 1

POLYSITE® High Flow

POLYSITE® High Flow

Catalog excerpts

All Perouse Medical catalogs and technical brochures