POLYSITE® Standard - 4000 series

Product catalog summary

Introduction: This document provides technical specifications and details for the POLYSITE® 4000 series, which are hybrid ports made from titanium and POM (Polyoxymethylene) used for the injection of contrast media during CT and MRI procedures.

Port Characteristics: The document lists various models of the POLYSITE® 4000 series, detailing their dimensions, weight, and internal volume. The ports are available with or without an introducer and can be pre-connected or not. The base diameter is 37.5 x 22.5 mm, with a port height and septum diameter of 12.1 mm, and a weight of 7.7 grams. The internal volume is 0.55 ml.

Catheter Specifications: The document distinguishes between silicone and polyurethane catheters. Silicone catheters have an external diameter of 2.4 mm, an internal diameter of 1.2 mm, and a wall thickness of 0.6 mm. Polyurethane catheters have an external diameter of 2.1 mm, an internal diameter of 1.4 mm, and a wall thickness of 0.35 mm. Both types have a length of 600 mm and are compatible with 8 F and 7 F sheath introducers, respectively.

Flow Rates: The average flow rates under a 1 m column of water are provided for different gauge sizes (22G, 20G, 19G), with silicone catheters having flow rates of 13, 30, and 37 ml/min, and polyurethane catheters having flow rates of 13, 31, and 39 ml/min.

Complete Set Content: Each set includes a standard port, a silicone or polyurethane catheter, connecting rings, a straight Huber needle, a catheter introducer, a catheter rinse, an introducer, a J guidewire, a puncture needle, a tunneling device, and a syringe.

Material and Design: The ports are made from a titanium-POM combination, offering low weight and patient comfort while reducing the risk of rotation. The titanium reservoir ensures compatibility with cytotoxic ingredients. The POLYSITE® range is sterilized by ethylene oxide and is MRI compatible.

Catalog excerpts

Compa tibles VENOUS STANDARD Standard POLYSITE® 4000 series - Hybrid: titanium and POM* INJECTIO MEDIA D N OF CONTRAS T URING C T SCAN MRI PRO AN D C E DU R E S (cf. page 8) Shaped design Easy to connect Titanium reservoir: total compatibility with cytotoxic ingredients POM* radiopaque connecting rings Titanium-POM* combination: • low weight • patient comfort • reduce the risk of turning round Port characteristics References Port type/ Material With introducer Adult standard port titanium / POM* Adult standard port titanium / POM* Without introducer Silicone catheters characteristics References 4008 4008 ISP 4108 4108 ISP Sheath introducer Flow rate** (ml/mn) 22G 4 1 0 8 ISP ISP: Peel-away sheath introducer 1: polyurethane catheter 0: silicone catheter 1: pre-connected 0 : no pre-connected 8: 8 F Polyurethane catheters characteristics References Sheath introducer Flow rate** (ml/mn) 22G COMPLETE SET CONTENT 1 • standard port in titanium and POM* with a silicone septum 1 • silicone or polyurethane radiopaque catheter (graduated every cm with a mark every 5cm from 5 to 40cm) 2 • connecting rings (only one for the pre-connected references) 1 • straight Huber needle (22G) 1 • catheter introducer 1 • catheter rinse (only one for non pre-connected references) 1 • x 7F or 8F introducer (with or without peal-away sheath) 1 • J guidewire (0,035” / 60cm) 1 • puncture needle 18G, 70mm of usable length 1 • Ø 2,5 mm tunneling device, 23cm length 1 • x 10ml syringe *POM: Polyoxymethylene **Average flow rate in ml/mn, under a 1 m column of water. The POLY SITE ® range is sterilized by ethylene oxide. POLY SITE ® is a registered trademark of PEROUSE MEDICAL.

Open the catalog to page 1

POLYSITE® Standard - 4000 series

POLYSITE® Standard - 4000 series

Catalog excerpts

All Perouse Medical catalogs and technical brochures