Integrated pressure measurement The new sensors RPT 010 and IKT 010/IKT 011. Compact dimensions. Direct installation, no additional power supply. No special cable needed.

Integrated pressure measurement The new sensors RPT 010 and IKT 010/IKT 011. Compact dimensions. Direct installation, no additional power supply. No special cable needed. When installing a turbopump and gauge, is separate cabling required? Today it is no longer necessary! Save time and money with the new integrated RPT 010 and IKT 010/011 vacuum sensors. Neither a separate power supply nor a separate gauge controller is needed. Conventional pressure measurement Integrated pressure measurement Backing pump Turbopump Gauge controller Gauge power supply High vacuum Vacuum chamber System controller...

Customer benefit ■ Fewer components ■ Lower costs ■ Smaller and improved sensor technology ■ Piezo range gas type independent ■ Easy installation ■ Reliable digital communication ■ Unified protocol for pressure signal and status information of the turbopump ■ More stable high pressure reading

Integrated pressure measurement The new sensors RPT 010 and IKT 010/IKT 011. Compact dimensions. Direct installation, no additional power supply. No special cable needed. Simply connect two sensors with a TIC 010 converter directly to the drive electronics of your HiPace turbopump, reducing the number and length of cables. The sensors uses digital signals to communicate with the drive electronics making for a more reliable pressure signal rather than the use of analog transmissions. Direkte Installation 1 analog output, 0 – 10 V, 2 programmable digital output or relays* (*only with TC 400/1200...

Compact dimensions Compared to conventional vacuum gauges the new sensors are significantly smaller. In addition, the IKT sensors are characterized by a minimized magnetic stray field and, thanks to a new dual-chamber design with a textured surface, a longer service life. The Piezo sensor offers a stable low vacuum measurement independent of gas types whereas the Pirani sensor covers the pressure range of up to 1-10-4 hPa. The cold cathode sensors measure in a pressure range of 1 ■ 10-2 hPa to 1 ■ 10-8 hPa. For an optimal adjustment to the customer-specific process they are available as a low-current...

Integrated pressure measurement The new sensors RPT 010 and IKT 010/IKT 011. Compact dimensions. Direct installation, no additional power supply. No special cable needed.

Technical data Method of measurement Piezo/Pirani Cold cathode Cold cathode Flange (in) G 1/8" DN 25 ISO-KF DN 25 ISO-KF Protection category IP 54 IP 40 IP 40 Materials in contact with Ceramic, nickel, Stainless Stainless steel, glass, Stainless steel, glass, media steel, tungsten, silicon oxide, ceramic, nickel alloy ceramic, nickel alloy Weight < 92 g < 280 g < 280 g Order number Adapter Screw-on flange DN 16 ISO-KF to G 1/8'

Vacuum solutions from a single source Pfeiffer Vacuum stands for innovative and custom vacuum solutions worldwide, technological perfection, competent advice and reliable service. Complete range of products From a single component to complex systems: We are the only supplier of vacuum technology that provides a complete product portfolio. Competence in theory and practice Are you looking for a perfect vacuum solution? Please contact us: Pfeiffer Vacuum GmbH Headquarters · Germany T +49 6441 802-0 [email protected] All data subject to change without prior notice. PK 0111 PEN (Apris 2015/5)...