CW-150
4Pages

{{requestButtons}}

Catalog excerpts

CW-150 - 1

CHECKWEIGHER FOR TABLETS & CAPSULES New and innovative in-line solution designed to ensure the quality of each individual tablet or capsule weight for up to OEB3 level products. The CW-150 measures individual weight from each single tablet or capsule up to a speed of 150.000 objects per hour and rejects all non-compliant products. The ideal tool for in-line Quality Inspection and RTD (Real Time Decision). It can also be used off-line for batch recovery inspection.

Open the catalog to page 1
CW-150 - 2

3D MICROWAVE RESONATOR FOR WEIGHT MEASUREMENT Each product is inspected by the 3D microwave resonator allowing to measure individual weight to the accuracy of +/- 1mg (3 sigma). Various extensive repeatability tests campaigns and industrial case studies have shown that the measurements are within the predicted errors boundaries. The CW-150 is geared to provide an accurate weight and to remove 100% non-compliant products from the the product stream, allowing RTD (Real Time Decision). The CW-150 use simple calibration protocol for calibrating & validating the 3D microwave resonator based on a...

Open the catalog to page 2
CW-150 - 3

The unit has been developed with an utmost care to the mechanical design allowing fast and unexpansive format changes. Data are processed and analysed by high speed processors and stored in a userfriendly “step by step” CFR21 acquisition software. Data can easily be exported to an up-stream machine or software through OPC UA (e.g. connection to a upstream or downstream process equipment). A special care has been taken to simplify the equipment to allow use in a production environment. Designed to comply with common guidelines (i. e. the European Union’s CE Guidelines, UL…) they are supplied...

Open the catalog to page 3
CW-150 - 4

Technical data : Maximum throughput (size or shape dependent) Minimum product width (tablets) Maximum product width (tablets) Maximum product height (tablets) Size range (capsules) (hard gelatine) Good products 3D weight measurement accuracy Air extraction Requested compressed air Weighing range Non-compliant products Machine noise level Power supply Integrated with Hepa filter H13 500L/min - min. 6 bar ≤70 dB (A) 380V 3ph + N + PE Polymer contact parts Rue Graham Bell 8 B-1402 Thines (Nivelles) - Belgium Phone : +32 (0)67 70 13 00 E-Mail : info@pharmatec.be

Open the catalog to page 4

All Pharma Technology catalogs and technical brochures

  1. iTest 4P

    2 Pages

  2. eFlex

    2 Pages

  3. CU-120

    4 Pages

  4. CUB-20

    4 Pages

  5. iSpray

    2 Pages

  6. iSort

    2 Pages

  7. iCaps

    16 Pages

  8. iSeries

    24 Pages

  9. PTC iSeries

    2 Pages

  10. PFC iSeries

    2 Pages