iSpray
2Pages

EXTERNAL TABLET LUBRICATION SYSTEM The iSpray is a unique punch face and die wall lubrication system that continuously sprays dry lubricant onto tablet press, delivering a consistent and verifiable amount of lubricant onto the tablet outer surface. It is the ideal solution to cope with issues such as capping, sticking, too high ejection force, chemical incompatibility with formulation or poor dissolution. The system applies only the needed amount of lubricant while vacuuming the excess directly from the nozzle to keep the production environment clean. It therefore helps to reduce the amount of dry lubricant in the blend, or even eliminate it in the case of new formulations. The minimal quantity of lubricant sprayed externally onto the tablets can be accurately measured and validated as below the threshold for listing as an ingredient in the formulation. Recommended in hygroscopic formulation ■ Accurate spray rate thanks to high precision feeder ■ Consistent amount of lubricant sprayed thanks to the flow sensor Prevent capping and sticking issues ■ Quantity of lubricant sprayed on tablets below 0,1% ■ Back up line to support continuous manufacturing process ■ High under pressure vacuum integrated to prevent lubricant recirculation ■ Retrofittable to all existing tablet presses ■ Available for single and double sided tablet press ■ Fast & easy dismantling and cleaning ■ Complete Audit trail CFR 21 pa

Technical data Netto weight Brutto weight Tablet size Spraying range Requested compressed air Compressed air connection Noise level Power supply Contact parts finishing Frame parts Frame finishing Frame mounted on wheels Dust tight dispensing system Easily retrofittable to all tablet presses Back-up line secured by a continuous pressure monitoring Unique & compact spraying design Stainless steel 304 Brushed 320 Yes IQ-OQ protocol Material certificates Back-up line available Underpressure control Flow sensor Hepa Filter Available options : Vacuum valve Dispensing system Rue Graham Bell 8...