iTest 4P
2Pages

iTest IPC 4-Parameter Tablet Tester DUST-TIGHT «DT» OR CONTAINMENT «C» OEB3-4 The iTest is a new generation of automatic tablet testing system for integrated in process control (IPC). Intended for use as a stand-alone equipment with its own HMI or in combination with an upward conveying tablet deduster from Pharma Technology or Pharma Flex, the module offers premium analysis capabilities for weight, thickness, hardness and diameter - all in a compact «DT» dust-tight or «C» containment OEB3-4 design. At the heart of the unit’s design is the strict separation of dust or tablet fragments from the production stream, resulting in uninterrupted manufacturing. Tablets are sampled directly on the press and conveyed through a flexible hose to the tester via vacuum. The pinch valve placed at the input of the equipment, the optional H13 Hepa Filter and the light negative pressure are all elements which avoid environmental contamination and ensure increased safety for operators. Sample tablets are tested for each parameter against pre-programmed recipes. An utmost care has been taken to simplify the design for cleaning procedures. This new tester design, which includes a clear separation between product area and mechanical/electrical parts, increases safety during maintenance operations. All parts are accessible and easily disassembled without the use of tools, making the system extremely easy to service and maintain. Vacuum conveying of samples ■ Complete separation between product and mechanical/electrical area to increase operator safety ■ «DT» Dust-tight & «C» Containment OEB3-4 version ■ Extremely quiet testing environment with no Non-tested tablet recovery ■ CFR 21 Part 11 compliant software ■ Data can be extracted in Excel or PDF ■ Storage on USB stick, via Ethernet ■ Easy cleaning, validation and calibration

Weighing measurment: Technical data : Weighing cell Weighing unit Weighing range Weighing accuracy Dust-Tight aspiration (optionnal venturi if not sufficient vacuum at the customer location) Samples conveying Thickness measurment: Drive Standard "DT" Dust tight, or "C" OEB3-4 containment Containment level Dust extraction connection Mini Flex Connect © Magnetic Sensor Measurement unit Measurement range Power supply & Frequency Measurement accuracy Polymer contact parts Measurement principle Hardness measurment: Drive Contact parts finishing Frame parts Force measurement Frame finishing Load...