Catalogs >
PHC Europe B.V. / PHCbi >
iP-TEC® General Brochure

iP-TEC® General Brochure
12Pages

Catalog excerpts

UNIQUE LIVE CELL TRANSPORT PACKAGING SOLUTIONS Live transport; delivering cells in an unfrozen and “ready to use” condition. total solutions so that various cells and biological tissues including iPS cells can be transported alive without freezing.

Open the catalog to page 1

iP-TEC® Solutions Transporting samples in a frozen state has been the norm and a stable method of transportation, but comes with problems such as a risk of harming the cells when freezing and thawing them, losing vast amounts of cells in the process. Also, the lab-time, specialized equipment and personnel add considerable costs to shipping cells in a frozen state. However, these problems can be solved with live transport; delivering cells in an unfrozen and in a “ready to use” condition. There has been an increasing demand for live transport as regenerative medicine continues to develop,...

Open the catalog to page 2

Your innovative partner in LIVE SAMPLE TRANSPORT solutions With the iP-TEC® series, we have added a complete range of cell transportation solutions to the PHCbi product line. Ranging from primary/secondary containers for cell transportation to accessories, and high-performance temperature-controlled transport boxes (tertiary containers, heat and cold storage materials). Various combinations are available depending on the type of samples and purpose to be transported, the transport time, and the temperature. REDUCE YOUR COST Cells will not be affected by culture media needed capped without...

Open the catalog to page 3

Flask-25 When transporting cells in live condition, there is a risk that culture medium in a flask gets shaken and cells scale. By filling a flask with culture medium it can be transported in safety without this risk. Yet, this will make the amount of culture medium increase and costs more in conventional flasks. To solve this, we created a revolutionary form which minimizes the amount of culture medium used for transport without changing its incubation area. • • • • • User friendly for pipette and scraper. Safely stackable. Culture medium always stable. Incubation surface does not get...

Open the catalog to page 4

Flask-25 with vent cap Our containers allow cells to be transported in containers filled with culture solution in the absence of bubbles. Also it minimizes the risk of damage by vibration during transportation. The flasks also reduces the use of expensive culture medium by 55% - 65%. • • • With zero bubbles,transporting cells is worry-free! Ultra-thin membrane made of medical-grade silicon rubber. CO2 permeable. Ideal for rotation culture and microgravity culture, the results of which are affected by bubbles Code Name Zero bubbles • Culture area 25 cm • Hydrophillic treatment of culture...

Open the catalog to page 5

Cell Transport Container #RPE12 A closed-type primary container developed through joint research with the RIKEN Center for Biosystems Dynamics Research. It allows for high efficiency in cell processing and packaging, etc. to stabilize and maintain the cell’ s characteristics and structure. • Ideal for the culture and transport of cell sheets using 12-well inserts. • Simple structure with only 3 parts, easy to set up. • Silicon rubber inner container stabilizes and retains the insert to achieve a complete seal between the main container and the cap. • Uses medical-grade silicon rubber....

Open the catalog to page 6

Cell Transport Quadruple Container #24 iP-TEC® Cell Transport Container #24 • For transport of 24 well inserts • CO2 permeable • Highly efficient quadruple cap Code Name Caps and the main unit are sold seperately • Measurements: Outer diameter - Main unit: Ø 22mm; Cap: Ø 23 mm • Total height with cap: 30 mm • Total length: 100mm • Sterilized • Material Cap: Medical-grade silicon rubber • Dedicated 8-hole rack: PVC • Compatible with Flacon® and Foster® inserts • This product does not come with culture inserts. When being transported, the container is firmly stabilized by the lid of iP-TEC®...

Open the catalog to page 7

Live Transport solution for well plates and dishes Using Medical Silicone Rubber without cytotoxic effect • CO2 gas-exchangeable ultra-thin layer No need for the use of adhesive with the iP-TEC covers. Simply put the cover over the cell culture plate, put the plank on top and clip to seal. This much easier process minimizes the risk of touching and contaminating the culture medium. ® Liquid seal, optimal CO2 gas penetration The silicone covers consist of two parts: - A thin layer which falls into the wells or dish to allow CO2 exchange. - A thicker layer to smoothly cover the full plate or...

Open the catalog to page 8

iP-TEC® Dish cover Code Name iP-TEC® Plank for Dish cover Quantity Code Name • Material: medical grade silicone. • Sterilized and individually packed. • Can be cleaned with alcohol and is autoclavable. iP-TEC® Well Plate Cover • Material: PVC. • Non-sterile. • Packed individually. • Can be cleaned with alcohol. iP-TEC® Plank for Well Plate 6 - 12 - 24 - 96 wells Code Name Code Name • Material: medical grade silicone. • Sterilized and individually packed. • Can be cleaned with alcohol and is autoclavable. iP-TEC® Secondary container • Material: PVC. • Non-sterile. • Packed individually. •...

Open the catalog to page 9

Cell Sheet Transport Container ø38, ø50 Stable and safe transportation of cell sheets, living tissues, etc. Containers can be filled with culture medium and capped without trapping any bubbles inside. The container is specifically designed to prevent foaming of medium or wobbling of the contents. • The soft silicon rubber catches encased samples gently and delicately. • Zero bubbles, transport cells worry free! • CO2 gas permeable. Code Name Quantity IPT-28640 • Electron-beam sterilized • Material main unit: Polystyrene; Cap: PE, medical-grade silicon rubber • Vent type •...

Open the catalog to page 10

Standard Box-X13 The standard box is designed to transport all iP-TEC® secondary containers safely and with confidence. All inner isolation is fitted to prevent unwanted heat loss and gaps and prevent the samples from being damaged. With holding times of 36 ºC for up to 100 hours it is ideally suited for medium and long distance shipments. • When Using Temperature Stabilizer 36, 100 hours (at ambient temperature 25 ºC) 35 hours (at ambient temperature 5 ºC) Code Name Quantity Box & insert Data from a constant temperature room test at 25 ºC 45.0 Data from a constant temperature room test at...

Open the catalog to page 11