UV-C disinfection linear with sensor
3Pages

{{requestButtons}}

Catalog excerpts

UV-C disinfection linear with sensor - 1

UV-C disinfection linear with sensor TMS031 1xTUV T8 36W HFP Sensor 1 pc - HF Performer - White RAL9010 - 36 W - 220 to 240 V The UV-C linear with sensor is designed for the disinfection of surfaces and is suitable for a wide range of applications. The UV-C linear provides universal UV-C irradiance with homogenous distribution. Its disinfection capability is based on wattage used and a specific exposure time for a given distance from that surface. No persons or animals should be present at the time of usage, due to high risk of harm to eyes and skin. It comes with safeguard controls using sensor monitoring, which automatically shuts down the UV-C linear should a person or animal be detected within the range of the sensor. The performance is enhanced by a highly reflective and durable aluminum body, which improves its efficacy even further and directs the UV-C light to the to-be-irradiated surfaces and within the sensor range. Warnings and Safety • DANGER: Risk Group 3 UV product. Like any disinfection system, UV-C lamps and devices must be installed and used in the correct way. Direct exposure to UV-C can be dangerous and result in a sunburn-like reaction to the skin and serious damage to the cornea. As UV-C is invisible to the eye, the UV-C linear must be installed together with adequate safeguards to ensure that the UV-C linear can be operated in a safe way. The UV-C linears are only to be used as components in a system that consists of adequate safety safeguards such as, but not limited to, those indicated in the mounting instructions and/or user manuals. • Direct exposure to UV-C is dangerous. Philips UV-C products must only be sold through qualified partners and installed by professionals according to our stringent safety and legal requirements. Our UV-C products are not meant to be used in applications or activities which may cause and/or lead to death, personal injury and/or damage to the environment. Product data General Information Number of light sources Beam angle of light source 1 pc Number of gear units data subject to chan

Open the catalog to page 1
UV-C disinfection linear with sensor - 2

UV-C disinfection linear with sensor Overall height Optic type Lamellae louver Luminaire light beam spread Dimensions (Height x Width x Depth) Control interface Flying leads/wires Ingress protection code Mech. impact protection code Glow-wire test Flammability mark ENEC mark Warranty period Number of products on MCB of 16 A type B 28 Photobiological risk group 3 @ 200mm to Initial input power Initial Performance (IEC Compliant) Photobiological risk Power consumption tolerance Application Conditions Input Voltage Ambient temperature range Input Frequency Performance ambient temperature Tq...

Open the catalog to page 2
UV-C disinfection linear with sensor - 3

UV-C disinfection linear with sensor © 2021 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. 2021, March 11 - data subject to change

Open the catalog to page 3

All Philips catalogs and technical brochures

  1. SimplyGo

    4 Pages