Philips UV-C disinfection upper air wall mounted Breathe healthy air As part of the Philips UV-C disinfection upper air device series, Philips UV-C disinfection upper air wall mounted is designed to be installed on walls for the disinfection of air in a wide range of applications. Optimized for low ceiling heights, the UV-C rays are distributed at device level and above. The beam of UV-C rays is controlled by specific reflectors and the louvre design. This allows for the disinfection of the air in a space, while ensuring that day-to-day business activities can continue underneath the area where the device is active. Benefits • llows quiet disinfection of air while business activity continues underneath the A device’s level • UV-C light has been proven to effectively deactivate tested pathogens1 • Uses Philips UV-C lamps and drivers • Environmentally friendly - no ozone emissions during or after use. Features • hilips TUV T5 lamp included: 1x25W P • Shortwave UV radiation peak at 253.7 nm (UV-C) • ouvres and reflector control the distribution of UV-C at the device level and above, L where people are not usually present • Wall mounted installation • Complies with IEC 62471 standard for photobiological safety. R eed, N.G. 2010. The history of ultraviolet germicidal irradiation for air disinfection. Public Health Reports January–February, 125(1):15–27. Product family leaflet, 2020, July

Application Offices Retail Food outlets Hospitality Schools Banking Washrooms Warnings and safety DANGER: Risk Group 3 UV product according IEC 62471. Like any disinfection system, UV-C lamps and devices must be installed and used in the correct way. Direct exposure to UV-C can be dangerous and result in a sunburn-like reaction to the skin and serious damage to the cornea. As UV-C is invisible to the eye, the UV-C upper air device must be used and installed in strict accordance with the requirements set forth in the user manual and/or the mounting instructions. Philips UV-C luminaires systems...

Specifications Type Reflector material Light source Lamp included Optimal temperature range High Frequency ballast (HF-S) Wall mounted Housing material Screw mounting Product family leaflet, 2020, July data subject to change

Approval and Application Mech. impact protection code Ingress protection code Operating and Electrical Input Voltage Input Frequency General Information CE mark Flammability mark For mounting on normally flammable surfaces Lamp family code Product family code General information Order Code Full Product Name Lamp type Gear type UV-C radiation Full Component Name Product family leaflet, 2020, July data subject to change

©2020 Signify Holding. All rights reserved. The information provided herein is subject to change, without notice. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. All other trademarks are owned by Signify...