NASAL CAPAP UNIT nCPAP 200

Product catalog summary

Overview: The CPAP 200 is a nasal continuous positive airway pressure (NCPAP) unit designed for neonatal care, providing slightly pressurized air to assist infants with respiratory conditions. It is a non-invasive alternative to intubation and mechanical ventilation, suitable for very low birth weight infants and can be used immediately after birth.

Specifications: The CPAP 200 features a 320x240 pixel graphical monochrome display, oxygen control ranging from 21% to 100% FiO2 with ±2% accuracy, and flow control from 0 to 15 liters per minute with ±0.5 LPM accuracy. Airway pressure ranges from 0 to 20 cm H2O with ±1 cm H2O accuracy. It includes a safety valve and damper pressure set at 2 bar max. The unit operates at 110/230 V AC, 50/60 Hz, with a power consumption of 50 VA max and a battery backup of 1 hour.

Features: The CPAP 200 is equipped with intelligent alarms for apnea, oxygen set, airway pressure, gas supply, power failure, and battery low. It has a user-friendly control panel for setting output pressure and oxygen concentration. The unit is designed for minimal maintenance and silent operation.

Design and Mobility: The CPAP 200 is mounted on a stand with castor wheels for mobility, including two with foot-operated brakes. It has dimensions of 520 mm diameter for the base unit and a total height of 1300 mm, weighing 15 kg.

Environmental Conditions: The unit operates in temperatures from 5 to 40°C and can be stored or transported in temperatures from 5 to 45°C. It supports humidity up to 95% RH and air pressure from 700 to 1060 kPa.

Accessories: Standard accessories include air and oxygen hoses, breathing circuits, nasal prongs, bonnets, an IV pole, and a pressure generator. Optional accessories are a humidifier, compressor, bubble CPAP circuit, and oxygen cylinder.

Manufacturer: Phoenix Medical Systems Private Limited, located in Chennai, India, with contact details provided for sales and support.

Catalog excerpts

NflSfiL CfiPflP UNIT WCPRP 200 EFFECTIVE • INTENSIVE • SLEEK

Open the catalog to page 1

GENTLE support EASY breathing NASAL CPAP UNIT CPAP 200 Babies with a range of respiratory conditions need to have slightly pressurised air supplied throughout the breathing cycle. Nasal continuous positive airway pressure (NCPAP) is a means of providing this air through the nose of the baby. NCPAP is widely used as a more comfortable alternative to relatively invasive therapies, intubation and mechanical ventilation. It is suitable even for very low birth weight infants and can be administered immediately after birth. The CPAP 200 from PHOENIX is a sophisticated system for providing a blend of...

Open the catalog to page 2

NASAL CPAP UNIT Display Oxygen Control Accuracy Flow control Accuracy Airway pressure Accuracy Safety valve Damper pressure Oxygen calibration Blender Noise emission :320x240 pixel graphical monochrome display :21% to 100% FiO2 :±2% :0 LPM to 15 liter per minute (bar graph) :± 0.5 Liter per minute :0 cm H2O to 20 cm H2O (bar graph) :±1 cm H2O :2 bar :2 bar Max :User calibrated :Electronic blender :< 60 db Alarms: Oxygen set alarm: ±5% Airway pressure: ±2 cmH2O Check gas supply Power failure Mute-alarm indication Battery low Apnea: 0 – 25 seconds (visual indication) Power Working voltage Power...

Open the catalog to page 3

All Phoenix Medical Systems catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list