NASAL CAPAP UNIT nCPAP 300

Product catalog summary

Overview: The CPAP 300 is a sophisticated nasal continuous positive airway pressure (NCPAP) unit designed by Phoenix Medical Systems for neonatal care. It provides a blend of gases to infants in neonatal ICUs, delivery rooms, and during transport, ensuring efficient respiratory support.

Specifications: The unit features a 320x240 pixel graphical monochrome display, oxygen control ranging from 21% to 100% FiO2 with ±2% accuracy, and flow control from 0 to 15 liters per minute with ±0.5 LPM accuracy. Airway pressure ranges from 0 to 20 cm H2O with ±1 cm H2O accuracy. It includes a safety valve set at 2 bar and operates with a noise emission of less than 50 dB.

Alarms and Safety: The CPAP 300 is equipped with multiple alarms, including oxygen set alarm (±5%), airway pressure alarm (±2 cmH2O), air and oxygen input fail alarms, mute-alarm indication, battery low, power failure, and apnea alarm (0-25 seconds visual indication).

Power and Battery: The unit operates on 110/230 V AC, 50/60 Hz with a power consumption of 50 VA max. It includes a Li-Po/Li-ion battery with a 1-hour backup for continuous operation.

Design and Mobility: The CPAP 300 is mounted on a stand with four castors, two of which have foot-operated brakes for secure positioning. The unit's dimensions are 520 mm in diameter for the base, with a total height of 1300 mm, and it weighs 15 kg.

Environmental Conditions: The unit operates in temperatures from 5 to 40°C and can be stored or transported in temperatures from 5 to 45°C. It supports humidity levels up to 95% RH non-condensing and air pressure from 700 to 1060 kPa.

Accessories: Standard accessories include air and oxygen hoses, breathing circuits, nasal prongs, bonnets, an IV pole, and a pressure generator. Optional accessories include a humidifier, compressor, bubble CPAP circuit, and oxygen cylinder.

Contact Information: Phoenix Medical Systems Private Limited, No. 32/4, Jawaharlal Nehru Salai, Ekkattuthangal, Chennai 600 032, India. Tel.: 91-44-2225 1177, 2225 1178, Fax: 91-44-2225 0194, Email: [email protected], Website: phoenixmedicalsystems.com, Toll-free: 1 800 425 3503.

Catalog excerpts

NASAL CAPAP UNIT Total Maternal and Infant Care

Open the catalog to page 1

GENTLE support EASY breathing NASAL CPAP UNIT CPAP 300 Babies with a range of respiratory conditions need to have slightly pressurised air supplied throughout the breathing cycle. Nasal continuous positive airway pressure (NCPAP) is a means of providing this air through the nose of the baby. NCPAP is widely used as a more comfortable alternative to relatively invasive therapies, intubation and mechanical ventilation. It is suitable even for very low birth weight infants and can be administered immediately after birth. The CPAP 300 from PHOENIX is a sophisticated system for providing a blend of...

Open the catalog to page 2

NASAL CPAP UNIT Display Oxygen Control Accuracy Flow control Accuracy Airway pressure Accuracy Safety valve Oxygen calibration Blender Noise emission :320x240 pixel graphical monochrome display :21% to 100% FiO2 :±2% :0 LPM to 15 liter per minute (bar graph) :± 0.5 Liter per minute :0 cm H2O to 20 cm H2O (bar graph) :±1 cm H2O :2 bar :User calibrated :Electronic blender :< 50 db Alarms: Oxygen set alarm: ±5% Air input fail Mute-alarm indication Power failure Airway pressure: ±2 cmH2O Oxygen input fail Battery low Apnea: 0 – 25 seconds (visual indication) Power Working voltage Power consumption...

Open the catalog to page 3

All Phoenix Medical Systems catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list