Liquid_SunMate_Foam_In_Place_Seating
1 / 2Pages

Catalog excerpts

Liquid_SunMate_Foam_In_Place_Seating - 1

104 Morrow Branch Rd. Leicester, NC 28748 USA 1-855-SUNMATE www.facebook.com/sunmatecushions @SunMateCushions Exclusive distributor of Liquid SunMate® Foam-in-Place Seating in Québec, Canada Liquid SunMate Foam-In-Place Seating ® 1 To make a FIPS total insert, place the molding bag, with base cushions inserted, in the chair. The FIPS ingredients are mixed and poured into the molding bag. The client is then quickly transferred onto the bag, and is held in position during the foaming process (about 5 minutes). quickly rises around the contours of the body and sets into a solid cushion in a matter of minutes. The custom-molded seat cushion is then removed, trimmed and placed back in the chair before molding the back cushion. with base cushion inserted, is placed behind the client, who has been repositioned in the chair. The client leans forward while the technician pours the second FIPS mixture into the bag. leans back against the bag and is held in position during the foaming process. After about 5 minutes, the custommolded back cushion is ready to be removed, trimmed, glued to the seat insert and finished. Developed to meet the needs of the severely disabled, FIPS with Liquid SunMate provides: • assistive seating technology for complex positioning • advanced posture control • even pressure distribution • improved blood circulation • pressure point relief • relief of soreness and fatigue • improved bodily functions • slowing of progressive deformities • seating solutions in a matter of hours • tested, proven and accepted results by orthopedic professionals worldwide You can have a finished insert in 6 hours at your facility. The FIPS process was designed to be fast and efficient. It takes less than 2 hours to make an insert – seat and back! That includes a trial run-through, mixing, pouring, positioning, curing, and trimming. The insert can be fabric-finished and waterproofed in about 2 to 4 hours. The ease and versatility of the FIPS system makes it ideal for trial seating and emergency applications. FIPS has the technological advantage. SunMate® is a viscoelastic cushion material with “memory”. It flows to match the body’s contours, and slowly returns to its original shape once pressure is removed. SunMate is an open-cell foam which maximizes the flow of air through the cushion to reduce heat buildup. The cell structure alleviates sitting fatigue through uniform pressure distribution and impact energy absorption. When fabric-finished, a SunMate FIPS insert can withstand years of use. For these reasons, SunMate is the preferred seating material for race car drivers, aircraft pilots, mining vehicle operators, and long-haul truckers. FIPS is versatile, safe and inexpensive. Because it can quickly mold to any shape or size, Liquid SunMate can be used for many different applications: temporary foam supports, geri chairs, supine lyers, head rests, and foot supports, to name a few. SunMate and Liquid SunMate have naturally low levels of toxicity because natural ingredients constitute up to 42% of its formulation. This adds a sense of freshness you won’t find in other seat cushions. Liquid SunMate does not contain fire retardant additives, because they can release deadly fumes in a fire. However, a coating that is nontoxic, fire-retardant, waterproof and elastic may be applied to FIPS inserts, allowing them to maintain a low-level fire toxicity rating while meeting the tough standards of the California fire tests. SunMate also passes the strictly enforced slow burn fire codes of Canada without the use of fire retardants. Liquid SunMate is formulated for your specific needs. Liquid SunMate is available in three standard formulations: soft, medium and semi-rigid. The soft formula offers low-pressure support for sensitive pressure areas, milder deformation needs, or for small, lightweight clients. The medium formula is suitable for clients with body weights up to and including 300 lb. It yields less than the soft formulation under pressure, providing added support. The semi-rigid formulation, though rarely used for wheelchair clients, creates a very firm yet lightweight support base. It is often used in race car seating as a high-imp

Open the catalog to page 1
Liquid_SunMate_Foam_In_Place_Seating - 2

FIPS Bowl Pack Fabric-finishing a total insert Learning how to use FIPS. For your safety and the safety of your clients, one of following training methods must be completed and verified before orders for FIPS will be accepted. Training materials are free. Once your training verification is on file, you may begin placing orders for FIPS. FIPS Workshops Those who can provide verification of training from a FIPS workshop may also order Liquid SunMate. If you are interested in attending a workshop, please contact the Dynamic Systems Customer Service Department (1-855-SUNMATE) for more...

Open the catalog to page 2

All PHYSIPRO catalogs and technical brochures

  1. SIMULATOR

    5 Pages

  2. NEOX™

    3 Pages

  3. Mediclean

    8 Pages

  4. 2015_Catalog

    226 Pages

  5. XL5

    8 Pages

  6. hardy

    4 Pages

  7. Star_Cushion

    12 Pages

  8. Supracor

    10 Pages