HFNC Machine Ventilator replacement Medical device treatment: In addition to drug treatment, respiratory support treatments relying on medical devices, such as oxygen therapy, invasive mechanical ventilation, extracorporeal membrane oxygenation (ECMO), and circulatory support are of much helpful to those the most serious cases of coronavirus pneumonia. It also plays an important role in the treatment of critically ill patients. As there is no enough ventilators, it is time to introduce our high flow oxygen blender for replacement, it is very helpful for the early infection cases and the recovery patients from critical stages.

HFNC CPAP Support Arm Air Oxygen Blender Disposable Breathing Circuits with heating wire Humidifier PN-2000FB Caster with brake Nasal Cannula

Air Oxygen Blender Specification When gas supply pressure difference > 0.1 Mpa Alarm Noise Bleed Flow

Reusable humidifier chamber On/Off button Mode/Temperature button Mute button Temperature probe socket Heated wire socket

Classification Supply Voltage/Frequency Heater Plate Heater Wire(Max.) Heater Plate Over-temperature Cut Off Temperature monitoring Class IIb ,Type B,IPX1 220V/ 110V 50/60Hz 150W 22V-,2.73A, 60W, 50/60Hz 95±5℃ 0-75℃ Heated wire mode(mode indicator lighted) Temperature grade Continuous flow range Delivered patient (with indicator status) temperature P1 (●○○) 5L/min-60L/min 25-29℃ P2 (●●○) 5L/min-60L/min 29-35℃ P3 (●●●) 5L/min-60L/min 35-39℃ Non-heated wire mode(mode indicator non-lighted) Temperature grade Continuous flow range Delivered patient (with indicator status) temperature P1 (●○○) 5L/min-60L/min...

Humidifier PN-2000FB Model Humidity Performance Display Three digit,0.56 inch,7 segment LED 10-70℃,Accuracy:±2℃( In 25-45℃ temperature range) 135mm(W)*145mm(H)*155mm(D) (without chamber) 2.5kg(max) (without chamber) 3.2 kg(max) (with chamber filled water) Operating environment Temperature:18℃—26℃ Relative humidity : ≤95%(without condensation) Atmospheric pressure: 86KPa-106Kpa Temperature: -40℃～55℃ Relative humidity : ≤95%(without condensation) Transportation and Storage environment Electrical safety standard Device specific standard

Air compressor PN-3000 Specification of Air Compressor PN-3000 Output pressure Output flow Maximum exhaust pressure Start method start with pressure, and the pressure >0.5MPa Protection function high-temperature and over-heat protection Pressure display Air compressor PN-3000 (Optional , match with blender flowmeter 6-60L) It can match with different ventilators of Drager, Maquet ,Fabian,GE and so on pressure gauge Hours meter Power rate

Other Parts Description:Temperature probe Qty:1 unit VHC20 Disposable auto-fill chamber,adult Description:Heated wire adaptor Qty:1 unit Adult Nasal Cannula Disposable breathing circuit with heated wire

HFNC without air compressor HFNC with air compressor (Front) HFNC with air compressor (Back)

HFNC Main Standard configuration Description HFNC with air compressor Included: 1.Air oxygen blender 2. Humidifier with disposable chamber 3.Support arm 4. Adult disposable breathing circuit with heated wire 5.nasal cannula 6.Trolley 7.Medical air compressor 8.Tool kits HFNC without air compressor Included: 1.Air oxygen blender 2. Humidifier with disposable chamber 3.Support arm 4. Adult disposable breathing circuit with heated wire 5.nasal cannula 6.Trolley 7.Tool kits

Headquater Factory Puning City No.118,6/Zhuyuan,ChiweiTown, Puning City,Guangdong ,China Email:[email protected] Website:www.pigeon-medical.com