840-PH-10, Powder Handling Glove Box Standard features of the 840 include: Standard features of the 840 include: • 3/8” thick clear acrylic construction with 3/8” thick • Magnehelic™ Gauge bracket with on/off switch for blower. bright white acrylic bottom. • No removable top. • Hinged Front Door with oval polypropylene glove ports • HEPA Capsule with manual ball valve. and door lock hasp. • Magnetic Interlocks on transfer chamber doors. • White Hypalon™ Gloves • Single, covered electrical receptacle. • Closed-Loop Double HEPA Filtration Package. • Work Station Ionizer, #800-AS/SPI (see below). • Two clear acrylic square transfer chambers. Ingress/ • Leak test Report, ISO 14644-7 class I (Tf ≤ 5 x 10-4) Egress. No gas valves. ID: 17”wide x 13” deep x 13” high NOTE: With optional Bag-In / Bag-Out port (800-BIBO), observed containment levels are <1.0 nanograms/cubic meter. With standard 840-PH Series configuration, observed containment levels are 12.5 nanograms/cubic meter. Included: 800-AS/SPI, Anti-Static Ionizer. Emits alternating positive and negative ions, removing static inside the glove box. This is a non-air assisted static eliminator, (no blower / no fan). The 800-AS/SPI is perfect for working with fine powders and chemicals. Optional Accessories • 800-BIBO/PORT, Bag In/Bag Out port with twelve (14” OD x 48” long ArmorFlex™ bags.) Bag port is 12” OD clear acrylic with two machined grooves for bag placement. • 800-DT, Drying Train System for humidity reduction. Part Number: 840-PH-10 OD: 72” (includes transfer chambers) x 30” x 48” high Main Chamber ID: 34.5” wide x 24” x 30” high 800-BIBO 840-PH-20 OD: 84” (includes transfer chambers) x 30” x 48” high Main Chamber ID: 46.5” wide x 24” x 30” high