Flow Meters and Suction/Vacuum Regulators
5Pages

{{requestButtons}}

Catalog excerpts

Flow Meters and Suction/Vacuum Regulators - 1

pneumatech medical gas solutions Technical Datasheet Suction Controllers, Flow Meters & Accessories Description Pneumatech MGS Flowmeter's, vacuum suction units and accessories are designed for connection to medical gas terminal units, providing the interface between patient support equipment and the central medical gas pipeline system. Operation Flow meters and suction controllers can be connected to the medical gas system in the following ways: • Directly mounted • Remotely mounted When devices are remotely mounted, probe connectors shall be supplied with a barbed connection. These connectors are suitable for the attachment of medical gas hose assemblies. Remote devices can be installed in the following ways: • Medical rail • Wall mounted (bracket system) • Floor mounted (large vacuum jars) When flow meters or suction devices are connected to medical gas terminal units installed within bedhead trunking systems, on occasion there can be problems with clearance and the connection of humidifiers/collection jars. In these instances an extra long probe shall be available. Please consult with the bedhead trunking supplier as Pneumatech MGS cannot be held responsible for connectivity problems in these circumstances. Whenever Pneumatech MGS General Ward bedhead trunking systems are installed extra long probes must be used if humidifiers/jars are to be connected directly to the devices. Classification • Standard connections suitable for BS 5682: 1998 • CE marked 0051 • Flow meters EN 13220:1999 and ISO 15002:2008 • Oxygen regulators ISO 10524-1:2006, EN 738-1:1997 Services • Oxygen • Nitrous Oxide • 50% Oxygen / 50% Nitrous Oxide • Air 400 kPa (4 bar) • Air 700 kPa (7 bar) • Medical Vacuum Options Other norms shall commonly include: • DIN German • NFPA American - DISS, Diamond, Latch and Geometric (PB) • AFNOR French Other types are available upon request. Materials Flowmeter shall be manufactured to EN 13220:1999 and ISO 15002:2008 and constructed from chromium-plated brass body, inner and external tube in polycarbonate and stainless steel ball. Other pieces shall be in brass, polyamide and NBR. Latex free. High precision dial flowmeter's shall be aluminium body, polycarbonate dial and chromium-plated brass DISS outlet. Other parts shall be made of stainless steel, NBR, silicone and polyamide. Vacuum suction devices (high and low) shall be ABS and polycarbonate body and a polycarbonate vacuum gauge cover. O-rings shall be NBR and silicone, pneumatic mechanism in POM and TPE. inlet thread female WGAS %” shall be chrome-plated brass. High precision continuous/intermittent suction devices shall be manufactured in aluminum (body), polycarbonate (scale), poly-sulfone (water trap), with remaining internal pieces made out of silicone, viton, POM and TPE. Water trap and bacterial filter housing shall be in polycarbonate as standard or polysulphone on request. Oxygen regulators shall be supplied to ISO 10524-1:2006, EN 738-1:1997 and constructed from chrome-plated brass (high pressure stage), chrome-plated aluminium, stainless steel, polycarbonate, NBR, sintered bronze (inlet filter) and TPE (gauge cover). Specification Sterilising: SafetyTrap ® and DISS adapter Steam sterilization in gravity autoclave: • SafetyTrap® PC: 121°C, 1,3kg/cm2, for 25 minutes* • SafetyTrap® PSU: 134°C, 2,4kg/cm2, for 15 minutes* • DISS adapter: 134 °C, 2,4 kg/cm2, for 15 minutes * * Drying time: 30 min SafetyTrap® PC can be sterilized up to 40 times and SafetyTrap® PSU can be sterilized up to 100 times. The DISS adapter can be sterilized an unlimited number of times. Before each use, verify that the device is not damaged. Never put the product in direct contact with the autoclave chamber (it could be damaged). It is recommended to use a basket. Pneumatech Medical Gas Solutions • Email: sales@p-mgs.com • www.p-mgs.com • The right is reserved to change this technical specification without prior notice

Open the catalog to page 1
Flow Meters and Suction/Vacuum Regulators - 2

Technical Datasheet Humidifier: Sterilisation should be conducted in an autoclave on a 25 min cycle at 121 °C, 1,3 kPa (max. 40 times). Before sterilisation remove the tube and diffuser and consequently disposed. Warranty The flowmeter and vacuum suction unit shall have a two-year warranty, subject to the recommended minimum routine maintenance operations being carried out by correctly competent persons. Technical Specification Pneumatech Medical Gas Solutions • Email: sales@p-mgs.com • www.p-mgs.com • The right is reserved to change this technical specification without prior notice

Open the catalog to page 2
Flow Meters and Suction/Vacuum Regulators - 3

pneumcrfech medical gas solutions Technical Datasheet Accessories Product Accessories Part Number Other Products A range of other products include: Water manometer regulator of 0-30 cmH2O Rail mounted thoracic drainage assembly 0-30 cmH2O Equipment trolleys Portable electric suction devices Rail mounting solutions Wall bracket solutions Device and collection kits, including interconnecting tubes Face masks Bottle holders Pneumatech Medical Gas Solutions • Email: sales@p-mgs.com • www.p-mgs.com • The right is reserved to change this technical specification without prior notice

Open the catalog to page 3
Flow Meters and Suction/Vacuum Regulators - 4

pneumcrfech medical gas solutions Technical Datasheet Flowmeter Flowmeter Selector Flow selector Hose -tube record 3540605 plated brass she PA 66 ♦ Chromium piatod brass Selector body Chromium plated brass aiUCKE control knob Chromium plated brass Pneumatech Medical Gas Solutions • Email: sales@p-mgs.com • www.p-mgs.com • The right is reserved to change this technical specification without prior notice co

Open the catalog to page 4
Flow Meters and Suction/Vacuum Regulators - 5

pneumatech medical gas solutions Technical Datasheet High Vacuum Suction Venturi Suction Pneumatech Medical Gas Solutions • Email: sales@p-mgs.com • www.p-mgs.com • The right is reserved to change this technical specification without prior notice Part Number

Open the catalog to page 5

All Pneumatech MGS catalogs and technical brochures

  1. Zeus

    4 Pages

  2. AGS System

    4 Pages