Skin Contact ApplicationsClear Nylon Reinforced Polyurethane Film with H-520 Product: FLEXcon® dermaFLEX™ NNRU 100 • NNRU (Nylon Netti ng Rei nforced Urethane) i s a conformable polyurethane fi lm re i nforced wi th a nylon netti ng for high extensi b i lity & strength • H-520 general purpose acrylic adhes ive wi th moderate strength Please note: Our comb inati on of flexible substrates and skin-fri endly adhes ives form a product portfoli o that i s su itable for a vari ety of appl i cati ons. Choose from exi sti ng products, or work with ourTechn i cal Serv i ce team to create your own uni que comb i nat i on that’s opti m i zed for your speci fi c appl i cat i on needs. FLEXcon® dermaFLEX™ adhesives have been tested for biocompatibility (skin irritation, sensitization, and cytotoxicity) by FLEXcon’s adhesive suppliers using iSO-10993 or simitar test methods*. dermaFLEX™adhesives could be usedas a device component forappiications where d irectskin contactmayoccur, including: • Medical Tapes • Patient Care We have the flexible.ity to customize constructions to meet your converting and end-use requirements. This includes releaseliner, carrierfiim, adhesive thickness, andother var ables. For more information on FLEXcon's pressure-sensitive film solutions for Skin Contact Applications contactyour local Sales Representative or our Performance Products Business Team at (508) 885-8440. • H-520 is ideal for general use securement • Backed wi th a 50-lb. bleached kraft release l i ner su i table for roll form converti ng FLEXcon 1 FLEXcon Industrial Park, Spencer, MA 01562-2642, Telephone (508) 885-8440 FAX (508) 885-8355

TEST METHOD PRODUCT DATA VALUE Physical Properties Thickness (Mils[microns]) Film 1.0 (25) +/-10 % ASTM D 3652 (Modified for use with Scrim & 3.8-G.2 (97-107) +/- 0.4 (10) non-tape products) Adhesion Properties Ultimate Peel from Polyethylene Polypropylene Stainless Steel Expected Shear ASTM D 903 (Modified for 72 hour dwell time) Room Temp (hours) Tack (gm/sq cm) Storage Stability Two years stored at 70°F (21 °C) and 50% relative humidity *Biocompatibility testing was completed using a similar ‘source’ adhesive in some circumstances. Full biocompatibility results are available on the web and...