CAD-CAM discs
1 / 22Pages

Catalog excerpts

CAD-CAM discs - 2

Cad-Cam discs High quality. Time saving. Esthetic.

Open the catalog to page 2
CAD-CAM discs - 3

01 Polident PMMA CAD-CAM discs multilayer, basic, splint 02 Polident Pink CAD-CAM discs basic 03 Polident Casting CAD-CAM discs 04 Polident Model CAD-CAM discs 05 Polident X-ray CAD-CAM discs

Open the catalog to page 3
CAD-CAM discs - 4

The multi-colored disc consists of five color shades with gentle color transitions that provide a natural look

Open the catalog to page 4
CAD-CAM discs - 5

PMMA CAD-CAMdisc MULTILAYER CAD-CAMdisc Multi-layered, pre-coloured PMMA discs for making temporary crowns and bridges. A multi-layered disc is composed of five shades of colour with gentle colour transitions that give it a natural look. Vickers hardness: 26 HV. Flexural strength: min. 114 MPa. E-Module: min. 2771 MPa. Residual monomer < 1%. Diameter: 95 - 98,5 mm. Thickness: 15, 16, 18, 20 mm. temporary crowns and bridges High quality. Time saving. Esthetic.

Open the catalog to page 5
CAD-CAM discs - 7

Discs PMMA CAD-CAMdisc CAD-CAMdisc Suitable for fabrication of temporary crowns and bridges and for verifying the bridge on the plaster model/ in mouth before the final ZrO2 milling process Vickers hardness: 26 HV. Flexural strength: min. 114 MPa. E-Module: min. 2771 MPa. Residual monomer < 1%. Diameter: 95 - 98,5 mm. Thickness: 12, 13, 14, 15, 16, 18, 20, 25 mm. temporary crowns and bridges, verification of the bridge on the plaster model/ mouth A1, A2, A3, B1, B2, B3, BL1, BL2, BL3 enamel colours: E1, E2 *Upon request we can supply also other shapes, diameters and/or designs. High...

Open the catalog to page 7
CAD-CAM discs - 9

Discs PMMA CAD-CAMdisc CAD-CAMdisc Suitable for fabrication of splints Vickers hardness: 26 HV. Flexural strength: min. 114 MPa. E-Module: min 2771 MPa. Residual monomer < 1%. Diameter: 95 - 98,5 mm. Thickness: 12, 13, 14, 15, 16, 18, 20, 25 mm. bite guards, therapeutic splints, drilling templates, bite regulators CLEAR BERRY, BLUE , GREEN, ORANGE High quality. Time saving. Esthetic.

Open the catalog to page 9
CAD-CAM discs - 11

PINK CAD-CAMdisc BASIC CAD-CAMdisc Can be used to mill digitally designed highly esthetic and functional dentures Vickers hardness: 26 HV. Flexural strength: min. 114 MPa. E-Module: min. 2771 MPa. Residual monomer < 1%. Diameter: 95 - 98,5 mm. Thickness: 25, 27, 30 mm. full dentures, partial dentures, temporary immediate load implant dentures pink, pink veind High quality. Time saving. Esthetic.

Open the catalog to page 11
CAD-CAM discs - 13

CASTING CAD-CAMdisc CAD-CAMdisc Can be used for milling castable frameworks for metal casting and castable layers for press ceramic Produced of 100% organic material that burns-out without any residual ash. Diameter: 95 - 98,5 mm. Thickness: 12, 15, 18, 20, 25, 30 mm. Colour: transparent. milling frameworks for casting, milling castable layers for press ceramic, verifying frameworks on plaster model/ in mounth before final ZrO2 milling (especially recommended for larger ZrO2 frameworks) High quality. Time saving. Esthetic.

Open the catalog to page 13
CAD-CAM discs - 15

MODEL CAD-CAMdisc CAD-CAMdisc Suitable for milling dental models This is a special, highly-compressed material with exceptional abrasion resistance. The model doesn`t absorbe liquids so it is recommended for ceramic layering. Nevertheless, it has excellent milling ability. Available in two densities. Diameter: 98,5 mm. Thickness: 25 mm. Milling of stumps/ dies, working models and antagonists. Digital models are CAD designed from 3D data acquired with a wide range of digital impression-taking solutions. High quality. Time saving. Esthetic.

Open the catalog to page 15
CAD-CAM discs - 17

X-RAY CAD-CAMdisc CAD-CAMdisc X-ray visible disc used for milling diagnostic stents for implant planning Contains Xray visible powder. Homogeneous mix ensures best visibility. Prevents light scattering. Diameter: 95 - 98,5 mm. Thickness: 12, 14, 15, 16, 18, 20, 25 mm. allows visibility of teeth setup in the X-ray CAT scan for implant planning and determination High quality. Time saving. Esthetic.

Open the catalog to page 17
CAD-CAM discs - 19

Are you interested in other color, shape, material? WE CAN DEVELOP and PRODUCE IT FOR YOU! * for bigger quantities

Open the catalog to page 19
CAD-CAM discs - 20

High quality. Time saving. Esthetic.

Open the catalog to page 20
CAD-CAM discs - 22

since 1958 Polident d.o.o. Dental Products Industry Volčja Draga 42 5293 Volčja Draga Slovenija

Open the catalog to page 22

All POLIDENT d.o.o. catalogs and technical brochures

  1. MODEL DISC

    1 Pages

  2. ACRYLICS

    2 Pages