Catalog excerpts
POLIDENT MODEL CAD / CAM DISC POLIDENT MODEL CAD / CAM DISCS are suitable for milling dental models. INDICATIONS Milling of stumps/dies, working models and antagonists. Digital models are CAD designed from 3D data acquired with a wide range of digital impressions-taking solutions. Verifying frameworks on plaster model before final ZrO2 milling (especially recommended for larger ZrO2 frameworks). CHARACTERISTICS Available in two densities: A higher density (beige) is easily machinable with CNC milling machines and has an extremely high quality surface finish. With its tight cell structure is especially recommended for milling of stumps/dies. A lower density (brown) is easily machinable with CNC milling machines and is very light to handle. Recommended for bigger models and antagonist models. The material closed cell structure doesn’t absorb water and is recommended for ceramic layering. Diameter: 98,5 mm Thickness: 25 mm Store in dry place at room temperature. Temperature variations should be avoided during the transport and storage. TECHNICAL DATA Density Hardness Compressive strength Flexural strength Coefficient of thermal expansion Polident d.o.o. Slovenija, Volčja Draga 42, 5293 Volčja Draga, Slovenija T:+386 53304840, F:+386 53304870 E-mail: polident@polident.si POLIDENT MODEL CAD / CAM DISC POLIDENT MODEL CAD / CAM DISCS are suitable for milling dental models. INDICATIONS Milling of stumps/dies, working models and antagonists. Digital models are CAD designed from 3D data acquired with a wide range of digital impressions-taking solutions. Verifying frameworks on plaster model before final ZrO2 milling (especially recommended for larger ZrO2 frameworks). CHARACTERISTICS Available in two densities: A higher density (beige) is easily machinable with CNC milling machines and has an extremely high quality surface finish. With its tight cell structure is especially recommended for milling of stumps/dies. A lower density (brown) is easily machinable with CNC milling machines and is very light to handle. Recommended for bigger models and antagonist models. The material closed cell structure doesn’t absorb water and is recommended for ceramic layering. Diameter: 98,5 mm Thickness: 25 mm Store in dry place at room temperature. Temperature variations should be avoided during the transport and storage. TECHNICAL DATA Density Hardness Compressive strength Flexural strength Coefficient of thermal expansion Polident d.o.o. Slovenija, Volčja Draga 42, 5293 Volčja Draga, Slovenija T:+386 53304840, F:+386 53304870 E-mail: polident@polide
Open the catalog to page 1All POLIDENT d.o.o. catalogs and technical brochures
-
PMMA CAD CAM disc POLIDENT
2 Pages
-
POLIDENT PINK
1 Pages
-
CASTING CAD-CAM DISC
4 Pages
-
CAD-CAM MODEL DISC
4 Pages
-
CAD-CAM discs
22 Pages
-
3 Why to choose Ref-Line
2 Pages
-
DATA SHEET REF-LINE
5 Pages
-
Mould Chart Ref-Line
2 Pages
-
Primodent Mould chart
2 Pages
-
Polident catalogue
66 Pages
-
Cross Linked 2 Mould chart
2 Pages
-
ACRYLICS
2 Pages
-
Ref-Line Mould chart
2 Pages