Ultravap® Levante Automation-ready blow down evaporators from Porvair Sciences Robot-compatible dry down station for LCMS applications Intuitive graphical colour touch screen display Up to five stored evaporation programmes Up to three programmable steps per method On board gas management Remote control from PC option RS232 connection with full remote control command set Reversible screen for integration at side of robot Built-in fume management and optional duct connector Faster evaporation times Choice of 24-, 48-, 96- and 384-well heads Small footprint to fit in your hood Eco mode extends...

Flexible programming In comparison with previous models, the Ultravap® Levante has a smaller footprint, allowing better access and saving valuable bench space. The evaporation table is able to rise under the control of a stepper motor as the drying process proceeds. Precision Swiss-made stepper motors are used in all Ultravaps to precisely control the upward movement of the stage in 0.1cm increments, ensuring that with careful programming, the evaporator head remains just above the surface of the liquid to be removed for optimum efficiency. An on-board digital flow controller allows accurate...

Any Ultravap® Levante can be operated directly over the built-in RS232 link, so that programming can be carried out remotely and start/stop commands sent from a network. Station I.D. numbers can be set and stored for each unit. Units can easily be taken out of remote control mode for maintenance or where a randomaccess programme is required. The Ultravap® Levante comes with an RS232 connection and a remote command set. Whilst not sporting the smart plate “shuttle” of the premium Ultravap® Mistral, it is still possible to connect to and operate from a robot liquid handling station using the Ultravap®...

Removable/reversible screen Colour touch screen programming Optional protective anti-splash membrane_ Optional 4" fume extractor duct with built-in fan Warm nitrogen gas injected directly into each well of the microplate for optimal drying Choice of interchangeable needle heads. Spiral or straight 96; 384, 48 and 24 straight Tough, clear splash and safety guard Accepts plates or vials up to 60mm height overall SLAS standard plate nest RS232 control by external PC or LH robot system Precision stepper motor raises plate stage towards needles during run to speed evaporation Gas inlet for N2 or dry...

Solvent compatibility The Ultravap® Levante is supplied with an evaporator head of your choice, which may be interchanged quickly and easily with a head of a different pattern as your workflow demands. With a choice of 96 straight or 96 spiral needles, plus 24, 48 and 384 straight needles, the sphere of application for Ultravap® Levante is huge. Most common chromatography solvents can be evaporated with ease, including dichloromethane, methanol, acetonitrile and hexane. The nitrogen blow-down method is not, however, suitable for high-boiling point solvents such as DMF, DMSO and water. It is not...