An Instrument Air system provides high pressure, clean, dry air for medical support services. • 5.1.3.9.2.1 "Instrument air shall be permitted to be used for any medical support purpose (e.g., to remove excess moisture from instruments before further processing, or to operate medical-surgical tools, air-driven booms, pendants, or similar applications) and, if appropriate to the procedures, to be used in laboratories." • 5.1.3.9.3.1 "Instrument air sources shall produce air at not less than a gauge pressure • 5.1.3.9.10.1 (2) "Local alarm and alarms at all master alarm panels that activate when the dew point at system pressure exceeds -30°C (-22°F), indicating high dew The Powerex Instrument Air systems are NFPA 99 compliant and feature 250 psi lubricated compressors, HMI touch screen panel, dual desiccant dryers, air receiver, and a dew point monitor set to alarm at -22°F. Extra heavy duty compressor design, state of the art touch screen display, and ease of installation makes Powerex your choice for your instrument air needs. 150 Production Drive, Harrison, Ohio 45030

System Features: • HMI touch screen display • Run time hour meter for each pump (on HMI) • High air temperature shutdown with indication • Full voltage starter with overload protection • Maintenance counter with alarm warning display • System pressure display (on HMI) • General compressor fault with remote contacts • Automatic start/stop control with energy saving variable-pump-drive system • Inlet filtration with replaceable elements • Air-cooled aftercooler for each compressor • Dual desiccant dryers • Dew Point monitor set to alarm at -22°F ENGINEERING SPECIFICATIONS Notes: 1—SCFM is listed...