Why Instrument Air? An Instrument Air system provides high pressure, clean, dry air for medical support services. Per NFPA 99: • 5.1.3.9.2.1 “Instrument air shall be permitted to be used for any medical support purpose (e.g., to remove excess moisture from instruments before further processing, or to operate medical-surgical tools, air-driven booms, pendants, or similar applications) and, if appropriate to the procedures, to be used in laboratories.” 5.1.3.9.3.1 “Instrument air sources shall produce air at not less than a gauge pressure of 1380kPa (200 psi) output pressure.” 5.1.3.9.10.1 (2) “Local alarm and alarms at all master alarm panels that activate when the dew point at system pressure exceeds –30oC (-22oF), indicating high dew point.” Why Powerex? The Powerex Instrument Air systems are NFPA 99 compliant and feature 250 psi lubricated compressors, HMI touch screen panel, dual desiccant dryers, air receiver, and a dew point monitor set to alarm at -22oF. Extra heavy duty compressor design, state of the art touch screen display, and ease of installation makes Powerex your choice for your instrument air needs. 150 Production Drive, Harrison, Ohio 45030 Telephone:(888)769-7979 Fax: (513)367-3125 www. Powerexinc.com

System Features: 250 psi lubricated air compressors Front Mounted Control Panel includes: • • • • HMI touch screen display Run time hour meter for each pump (on HMI) High air temperature shutdown with indication on the display (on HMI) Full voltage starter with overload protection Maintenance counter with alarm warning display (on HMI) System pressure display (on HMI) HMI touch screen with digital display Programmable Logic Controller Power Distribution block Through door Motor Protector Circuit Breakers for all pumps Pressure Transducer Dual 120Vac control transformers with fused primary and...