DENTAL SUPPLIES DENTAL ACCESSORIES Dental Film Processing 1. Immersion dental film processor for intraoral films (see adjoining pictures) Processing under daylight conditions. A darkroom is not necessary. A film clip for up to 3 films as well as a status development basket for up to 18 films are being used for the develop- ment of the intraoral x-ray films. The electronically regulated bath heating guarantees a steady temperature at all times Very powerful dryer-blower for fast and efficient film drying Chemistry recommended: type Dentamat 500 (see below) Immersion Dental Film Processor for Intraoral Films (with integrated daylight attachment) Fixer Bath Drying Chamber Developer Bath Water Bath 2. Immersion dental film processor for intraoral and for extraoral films 2 different film holders are available for the development of panoramic films (15 x 30 cm/5.91 x 11.82 in) as well as teleradiographs and film formats up to 18 x 30 cm/ 7.09 x 11.82 in. Intra-oral x-ray films are being developed by using a film clip for up to 3 films or a status development basket for up to 18 films. heating and drying information same as above Chemistry recommended: type Dentamat 3000 (see below) Dental Chemistry Patient`s X-ray Protection Thyroid Protector with Extension used for protection of thyroid and sternum Easy to handle neck Velcro fastener Dental Apron without Thyroid Protector Full coverage of front body and shoulder of the patient Velcro fastener in the neck Start Button Dental film processing sets (developer and fixer) as liquid concentrates for all brands, suitable for manual and automatic processing. DENTAMAT 500 developing set for processing of dental films in immersion film processors as well as manual processing Packing: 5 x 0,5 l one part developer and fixer concentrates Ready solution: each 5 x 1 l DENTAMAT 3000 developing set for processing of dental films in immersion film processors as well as manual processing Packing: each 3 l one part developer and fixer concentrates Ready solution: each 1 x 9 l  DENTAROLL developing set for processing of dental film especially in roller developing machines Packing: two part concentrates, consisting of developer (2 x 1,2 l part A + 2 x 0,25 l part B) and fixer (2 x 1,2 l part A + 2 x 0,25 l part B) Ready solution: each 2 x 10 l PRIMAX Berlin GmbH Meeraner Straße 17 e D-12681 Berlin  +49-30-54 98 72-0 +49-30-54 98 72 22 [email protected] www.primax-berlin.

LONG-LIFE STORAGE OF DENTAL X-RAY FILMS A) Continuous Band Film Mounts X-ray film envelopes in a continuous band system are suitable for 2x3 cm, 3x4 cm or 4x5 cm dental films. Patient information can be written directly onto the mounts. Available as clear or dull foil. This product allows the user to easily detach the required number of mounts. 1. Continuous Band Clear with white continuous writing strips (type 11490) made of transparent clear foil fit for readable writing with ballpoint. in practical large dispenser box of 1.000 pieces 2. Continuous Band Matt with white continuous writing strips...