X-RAY PROTECTION Radiation Shielding Foils, Sheets and Profiles Shielding foils and sheets are available in various sizes for lining rooms, protection walls and equipment. Alternatively, foils and sheets can be provided with a radiation resistant adhesive layer. The surface is non-corrosive. The lead thickness is determined in accordance with shielding regulations and health physics. All price offers will always be given with reference to the latest lead quote at the LME (London Metal Exchange / www.lme.co.uk). Self-adhesive shielding sheets and foils These foils offer a flexible solution for shielding rooms and equipment. They can be applied directly to gypsum boards, the adhesive layer is provided on one side. Fields of application: Where existing shielded walls have been constructed using gypsum plaster board it becomes very cost effective to apply additional layers of sheet or foil to increase the shielding of existing walls. Standard thicknesses: 0,5 mm, 1,0 mm, 1,5 mm, 2,0 mm (others on request) 1. Protective sheet 2. Modified acrylic adhesive 3. Lead sheet 4. Painted surface finish Application steps: Standard widths: 1000 mm and 620 mm (others on request) Standard lengths: see information on back side Various lead thicknesses can be achieved by superimposing. Needed tools Cutting into lengths Affixing lead stripes Shielding sheets Pb 99,5Cu (both sides tin-coated) As these foils have a surface tin coating on both sides these foils and sheets can be processed without lead contact (lead core encased). The tin coating is corrosion resistant and can be processed with most contact adhesives. Fields of application: Veneered doors, ceilings and floor linings, shielding of hollow and wall outlets. Build-up 1 Radiation protection core of lead 2 Corrosion resistant tin cladding Standard thicknesses: 0,5 mm, 1,0 mm, 1,5 mm, 2,0 mm, 2,5 mm, 3,0 mm (others on request) Standard width: 1000 mm (others on request) Various lead thicknesses can be achieved by superimposing. pallet packing PRIMAX Berlin GmbH • Meeraner Straße 17 e • D-12681 Berlin  +49-30-54 98 72-0 • 7 +49-30-54 98 72 22 • [email protected] • www.primax

Lead prism profiles are well suitable for walls with thick size lead. There are 3 different types to be combined: normal, foot and head profile. They are with key and slot. Each wall segment always consists of 1 foot part, 1 or more normal parts depending on room height and 1 head part. Self-adhesive Lead Stripes These stripes are used to seal the joints between lead sheets. They are available in different measurements, please see information below. Cavity Wall Switch Boxes They are used to prevent radiation emissions at screws, switches and plug sockets. Available as single, double or triple...