IX Breadboard and Filter Wheel For Olympus IX Inverted Microscope Systems The H3948 and HF108IX3 are specifically designed for the Olympus IX inverted microscope and give a simple yet versatile method of creating an illumination system tailored to your exact needs. • Both the breadboard and filter wheel take full advantage of the open access to the light path on the breadboard • The H3948 breadboard (6 mm pattern) allows the mounting and insertion of custom optics into the IX light path allowing the creation of a unique system for a specific application. • Simple cassette like insertion into the slide deck of the IX makes installation quick and easy • The HF108IX3 provides a compact and easy to install high speed filter wheel option which accommodates up to 8 32 mm diameter filters. • 32 mm filters completely fill the field of view in the eyepieces and large chip cameras. • Mounting the filter wheel below the nose piece allows the user to switch between wavelengths at high speeds but also to see fluorescent images through both the camera and eyepieces of the IX. • Compatible with Z Drift Compensator (ZDC). • Controlled via the ProScan® system and compatible with cellSens® and Metamorph®. *All brands are trademarks or registered trademarks of their respective owners.

IX Breadboard and Filter Wheel For Olympus IX inverted microscope systems Ordering Information High Speed Filter Wheel Deck Module for Olympus IX3 microscopes IX3 breadboard with 6 mm holes on 25 mm centres ProScan Controller with three filter wheel drives and three shutter drives ProScan Controller with XYZ drives, three filter wheel drives, three shutter drives and encoder capability ProScan Controller for linear stage control with XYZ drives, three filter wheel drives, three shutter drives and encoder capability * Only for control of HLD117IX stages only Compatible Illumination Products for...