QCS/EH150STK/EH200STK datasheet Front Loading Stackable Autoclaves The popular QCS range of autoclaves is now available in a double-stack configuration. It enables laboratories to enjoy all the benefits of this versatile machine whilst doubling-up on the amount that can be sterlised in a compact floor space. Choose from one of the two standard chamber sizes of 150 and 200 litres, and each offers 20% more loading capacity than other sterilisers of the same capacity the QCS has the flexibility to accommodate both small and taller than usual items, avoiding the need to invest in larger, heavier and more costly rectangular sterilisers. Each chamber has its own independent TACTROL®2 controller, a powerful system for programming simple cycles to fully featured multi-programme operations with printable records if required. For a busy working environment, automating the sterilising process and with features to assist in autoclave management, TACTROL®2 enables other tasks to be undertaken secure in the knowledge that sterilisation is proceeding safely and efficiently. Key Features • Quickseal single-action door fitted with thermal and pressure locks to prevent opening at load temperature above 80oC and pressures above 0.2 bar. • Tactrol 2 microprocessor control with simple and fully variable setting of process time, temperature with graphic indication of cycle status. • Automatic timed free-steaming. • Pre-cycle vacuum in which multiple Vacuum stages are programmed with interspersed heating to achieve steam penetration.1 • Pulsed freesteaming to maximise efficiency of Pre-cycle vacuum phase.1 • Vacuum Assisted Cooling.1 • Low water level sensor. • Post Cycle Drying for faster load drying.1 • Two full width stainless steel load shelves. • Epoxy coated panels and frame members are treated with an anti-bacterial agent which is effective against all bacteria and fungi including MRSA. • Pressure vessel carries a 10 year warranty and is insurance approved. • Service and support direct from manufacturer (or appointed distributor). 10ptional Priorclave Limited 129-131 Nathan Way, West Thamesmead Business Park London, SE28 0AB T: +44 (0)20 8316 6620 F: +44 (0) 20 8855 0616 * three phase supply, recommended for EH200

* three phase supply, recommended for EH200 * installation dimensions include space for doors to open fully and for pipes, etc. at the rear of the autoclave. Consideration should be given to allow access for routine servicing. All QCS autoclaves comply and conform to relevant international standards including BS2464-1993, PD5500:2000 Cat.3 European PED 97/23/EC, EMC compliance tested and CE marked for BS EN 61010-2-41. Support and Service Our highly trained service technicians provide dedicated pre- and after-sales support including planned maintenance programmes to ensure you get the most from...