Higher Capacity Front Loading Autoclaves The extra-large chamber capacity of the RSC 450 and 700 litre Priorclaves is a must for any laboratory undertaking high-volume throughput sterilising procedures or are frequently tasked with handling tall and bulky items. Despite their large rectangular chamber and high loading capacity the autoclaves require only a relatively small floor area are fitted with castors for easier positioning. To suit a diverse range of applications within food and drink, dairy, pharmaceutical, agriculture, education, healthcare and research laboratories Priorclave is able to supply these extrahigh capacity autoclaves with different heating systems electrical or direct steam heated or they can be fitted with an in-built steam generator. Buying into the Priorclave brand means first-class support at all times to ensure you maximise the efficiency of your sterilising procedures at all times. Key Features • Lower handwheel on door fitted with thermal and pressure locks to prevent opening at load temperature above 80°C and pressures above 0.2 bar. • Tactrol 2 microprocessor control with simple and fully variable setting of process time, temperature with graphic indication of cycle status. • Automatic timed free-steaming. • Water cooling jackets.1 • Pre-cycle vacuum in which multiple Vacuum stages are programmed with interspersed heating to achieve steam penetration. Incorporates Vacuum Assisted Cooling1 • Pulsed freesteaming to maximise efficiency of Pre-cycle vacuum phase.1 • Low water level sensor. • Post Cycle Drying.1 • Two full width non-tipping stainless steel load shelves. • Epoxy coated panels and frame members are treated with an anti-bacterial agent which is effective against all bacteria and fungi including MRSA. • Pressure vessel carries a 10 year warranty and is insurance approved. • Service and support direct from manufacturer (or appointed distributor). 1 Optional Priorclave Limited 129-131 Nathan Way, West Thamesmead Business Park London, SE28 0AB T: +44 (0)20 8316 6620 F: +44 (0)20 8855 0616 E: [email protected] www.priorclave.co.uk model: PS/RSC/EH450 autoclave capacity chamber size chamber material burnished 316 stainless steel loading format front loading loading height operating range heater power model: PS/RSC/EH700 autoclave capacity chamber size chamber material burnished 316 stainless steel loading format front loading loading height operating range heater power For direct Steam Heated models substitute EH with SH. Internal Steam Generator versions available.

Installation Specification model: PS/RSC/EH450 external dimensions (w x d x h) minimum installation =axbxc heater power model: PS/RSC/EH700 external dimensions (w x d x h) * installation dimensions include space for doors to open fully and for pipes, etc. at the rear of the autoclave. Consideration should be given to allow access for routine servicing. minimum installation =axbxc heater power Steam heated models have an extra 45mm working height. All Priorclaves comply and conform to relevant international standards including BS2464-1993, PC500:2012+A1 Cat.3 European PED 97/23/EC B1+D, EMC compliance...