Exhibit with us
*mymedicalexpo  
English
  1. Catalogs
  2. Prismlab China Ltd
  3. Automatic Trimming-ACTA-B
video corpo

Automatic Trimming-ACTA-B

Automatic Trimming-ACTA-B
1 / 1 PageView full catalog

Automatic Trimming-ACTA-B

Product catalog summary
Specifications:
  • The trimming line is automatically generated, ensuring no need for manual correction. The edge of the clear aligner after trimming aligns with the original trimming line with an accuracy of less than 0.3mm.
  • Trimming a single clear aligner takes less than 20 seconds, with no interference during the process.
  • The edge burr rate after trimming is less than 2%, and the rework rate for bad trimming is less than 1%.
  • The cycle time, including robot grabbing time, is 20 seconds per piece.
  • Equipment operates at 200-600V, 50-60Hz, with a power consumption of ≤ 3.5kw. Dimensions are 1300*1100*2000 mm, and the weight is 600kg.
General Parameters:
  • Positive pressure ranges from 0.3-0.7mpa, and negative pressure ranges from 0 to -101kpa.
Modules:
  • Air Pressure Module: Motor voltage is 220V, motor power is 60W, and speed is ≤ 210mm/s.
  • Leather Wire Conveyor Module: Spindle power is 800W, rotation speed is ≤ 40000rpm, with water cooling for heat dissipation. The cutter clamp head is 4mm, and spindle control is via a frequency converter.
  • Six Axis Robot Module: Includes axes for rotation, arm movement, wrist, bending, and flip-over. Power is 200-600V, 50-60Hz, with a power consumption of 0.39kw. The robot weight is 52kg, with various motion ranges and speeds for each axis.
Advantages:
  • Automatic grabbing and trimming process.
  • High precision and efficiency in processing.
See more

Catalog excerpts

Automatic Trimming-ACTA-B-1

Advantages • Automatic trimming line generation, no need further manual correction, the edge of the clear aligner after trimming is consistent with the original trimming line, and the accuracy is < 0.3mm • Operation time of trimming a single clear aligner: < 20 seconds No interference in the trimming process After trimming, the edge burr rate of clear aligner is less than 2% Bad trimming (rework) rate: < 1% TRIMMING MACHINE Six Axis Robot Module Spindle Moudle Spindle Power: 800W Heat Dissipation: Water Cooling Processing Cutter Clamp Head: 4mm Spindle Control Mode: Frequency Converter Leather Wire Conveyor module Motor Voltage: 220V Air Pressure Module Positive Pressure: 0.3-0.7mpa Gerneral Parameter Power: 200-600V 50-60Hz Equipment Cycle Time Cycle time: 20s/pc(Includes the robot grabbing time)

 Open the catalog to page 1

All Prismlab China Ltd catalogs and technical brochures

  1. thermoforming machine
    thermoforming machine

    1  Page

  2. Automatic assembly machine
    Automatic assembly machine

    1  Page

  3. Prismlab Catalog
    Prismlab Catalog

    14  Pages

  4. Automatic Clear Aligner Trimming Machine-ACTA-A
    Automatic Clear Aligner Trimming Machine-ACTA-A

    1  Page

  5. 3D printer-RP-600D
    3D printer-RP-600D

    1  Page

  6. 3D printer-RP-400D
    3D printer-RP-400D

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.