- Catalogs
- Process Sensing Technologies Ltd.
- Easidew I.S.
Easidew I.S.
Easidew I.S.
- Certified for hazardous areas with IECEx, QPS, ATEX, UKCA certifications.
- Available process connections: 5/8" UNF, G1/2" BSP, or 3/4" UNF.
- Measures dew-point or ppmV moisture content.
- Constructed from rugged 316 stainless steel with IP66 protection.
- Measurement range: -100 to +20 °C (-148 to +68 °F) with accuracy of ±2 °Cdp (±3.6 °Fdp).
- Includes a calibration certificate traceable to NPL and NIST standards.
- Performance: Measurement range of -100 to +20 °C dew point, accuracy of ±2 °C, response time of 5 minutes to T95.
- Electrical: 4–20 mA output signal, user-configurable, supply voltage of 12–28 V DC, and CE & UKCA conformity.
- Operating: Temperature range of -40 to +60 °C, compensated range of -20 to +50 °C, and maximum operating pressure of 45 MPa.
- Mechanical: IP66 ingress protection, 316 stainless steel housing, and fully interchangeable transmitter.
Catalog excerpts
Humidity and Dew-Point Instruments Dew-Point Transmitter (For Hazardous Area Applications) The Easidew I.S. (intrinsically safe) transmitter is a dew-point transmitter designed and certified for use in hazardous area applications (flammable or explosive gases) in all regions with certification from: IECEx, QPS, ATEX and UKCA. The Easidew I.S. is available with a 5/8" UNF process connection or alternatively with a G1/2" BSP or 3/4" UNF process connection. It is designed for ease of use, incorporating all of the features needed to make installation and operation into your air or gas management system as simple as possible. Michell's Ceramic Metal-Oxide Moisture Sensor technology-based transmitter is calibrated to international standards and is delivered with a traceable calibration certificate. • IECEx, QPS, ATEX, UKCA certified transmitter for use in hazardous areas • 5/8" UNF, G1/2" BSP or 3/4" UNF process connection • Dew-point or ppmV moisture content • 2-wire loop powered connection • Rugged 316 stainless steel IP66 construction • Compressed air • Medical Gas • CNG Stations • Trace Moisture • Measurement range -100...+20 °C (-148...+68 °F) • Accuracy ±2 °Cdp (±3.6 °Fdp) • Calibration Certificat
Open the catalog to page 1
Humidity and Dew-Point Instruments Technical Specifications Measurement range 0.5 °C (0.9 °F) dew point Traceable 7-point calibration certificate Electrical Specifications Output signal Supply voltage Load resistance Dew point: -100...+20 °C (-148...+68 °F) Moisture content in gas: 0–3000 ppmV Non-standard available upon request Current consumption Dew point or moisture content for ppmV Analog output scaled range 4–20 mA (2-wire connection, current source) User configurable over range Response time Operating Specifications Operating temperature -40...+60 °C (-40...+140 °F) 45 MPa (450 barg/6526...
Open the catalog to page 2All Process Sensing Technologies Ltd. catalogs and technical brochures
ES70 Sampling System4 Pages
Cermet II Hygrometer4 Pages
SF522 Pages
SF82 Transmitter4 Pages
S80004 Pages
SenzTx5 Pages
HC2A4 Pages
PST8 Pages
LD80002 Pages
- Medical sensor
- Temperature data-logger
- Laboratory testing system
- Temperature sensor
- Monitoring sensor
- Medical device testing system
- Control analyser
- Laboratory data-logger
- Gas sensor
- Analyser for the pharmaceutical industry
- Temperature testing system
- USB data-logger
- Pharmaceutical product data-logger
- Pressure sensor
- O2 analyzer
- Laboratory sensor
- O2 probe
- Testing system with touchscreen
- Humidity data-logger
- Calibration sensor