PA-25
PA-25
- Input Voltage: 12VDC
- Output Power: 15A per channel
- Control Ability: Up, Down, Pause (Momentary & Non-Momentary)
- Remote Battery Type: 2x CR2016 3V Lithium Cell
- Dimensions: 5.9" x 1.3" x 3.9"
- Weight: 1.10 lbs
- Warranty: 18 Months
- 2 Hand Remotes
- 2 Actuator Wire Harnesses
- 1 Power Wire Harness
- 1 Control Box
- Batteries
- Type: DC Motor, Bi-directional
- Number of Connections: 2
- Compatible with RC-13 rocker switch
- RED Wire to +V
- BLACK Wire to COM
- Power Supply: 120/220VAC (not included)
Momentary Mode:
- Ensure Jumper S1 on PCB is connected
- Hold UP to extend, release to stop
- Hold DOWN to retract, release to stop
Non-Momentary Mode:
- Ensure Jumper S1 on PCB is disconnected
- Press UP to extend, press again to stop
- Press DOWN to retract, press again to stop
- Pressing DOWN while extending reverses direction
- Open control box and press white button
- Blue LED turns on
- Press any button on remote, LED turns off
- Remote is saved to control box
- Maximum of two remotes per control box
Catalog excerpts
Control Ability Input Voltage Output Power Current Kit Includes Remote Functions Remote Battery Type Size (L x H x W) Weight Warranty Multiple Actuators 12VDC 12VDC 15A (Each Channel) 2 Hand Remotes, 2 Actuator Wire Harnesses, 1 Power wire Harness, 1 Control Box, Batteries Up, Down, Pause (Momentary & Non-Momentary) 2x CR2016 3V Lithium Cell 5.9" x 1.3" x 3.9" 1.10 lbs 18 Months
Open the catalog to page 1
Wiring Diagram RC-13 rocker switch compatible by plugging into socket located on rear of PCB board. Power Supply (not included) Wireless remote sync button Power Cable BLACK Wire to COM ACTUATOR Type: DC Motor, Bi-directional ACTUATOR
Open the catalog to page 2
Momentary/Non-Momentary Mode Momentary Mode Ensure the Jumper S1 on the PCB is connected Hold UP to extend the actuator, let go to stop the actuator Hold DOWN to retract the actuator, let go to stop the actuator Non-Momentary Mode Ensure the Jumpers S1 on the PCB is disconnected Press UP to extend the actuator, Press UP again to stop the actuator Press DOWN to retract the actuator, Press DOWN again to stop the actuator If DOWN is pressed while the actuator is extending, it will reverse direction and begin to retract Remote Synchronization Process Open the control box and press the white button....
Open the catalog to page 3
