PA-28
PA-28
- Input Voltage: 12VDC
- Control Ability: Dual Channel Individual Control
- Output Power: 12VDC
- Current: 30A (15A Per Channel)
- Kit Includes: 2 Hand Remotes, 1 Control Box, Remote Batteries
- Remote Functions: Up, Down, Pause (Momentary & Non-Momentary)
- Remote Battery Type: 12V Alkaline Battery
- Dimensions: 4.5" x 1.3" x 3.3"
- Weight: 1.05 lbs
- Warranty: 18 Months
- Type: DC Motor, Bi-directional
- No. Connections: 2
- Power Cable: RED Wire to +V, BLACK Wire to COM
- Power Supply: 120/220VAC (not included)
- Momentary Mode: Ensure Jumper S1 on PCB is connected. Hold UP to extend, let go to stop. Hold DOWN to retract, let go to stop.
- Non-Momentary Mode: Ensure Jumper S1 on PCB is disconnected. Press UP to extend, press again to stop. Press DOWN to retract, press again to stop. If DOWN is pressed while extending, it reverses direction.
- Open control box and press the white button. The blue LED will turn on.
- Press any button on the remote; the LED will turn off.
- The remote is now saved to the control box.
- A maximum of two remotes can be saved to one control box.
Catalog excerpts
Control Ability Input Voltage Output Power Current Kit Includes Remote Functions Remote Battery Type Size (L x H x W) Weight Warranty Dual Channel Individual Control 12VDC 12VDC 30A (15A Per Channel) 2 Hand Remotes, 1 Control Box, Remote Batteries Up, Down, Pause (Momentary & Non-Momentary) 12V Alkaline Battery 4.5" x 1.3" x 3.3" 1.05 lbs 18 Months
Open the catalog to page 1
Wiring Diagram Power Supply (not included) L N Type: DC Motor, Bi-directional ACTUATOR
Open the catalog to page 2
Momentary/Non-Momentary Mode Momentary Mode Ensure the Jumper S1 on the PCB is connected Hold UP to extend the actuator, let go to stop the actuator Hold DOWN to retract the actuator, let go to stop the actuator Non-Momentary Mode Ensure the Jumpers S1 on the PCB is disconnected Press UP to extend the actuator, Press UP again to stop the actuator Press DOWN to retract the actuator, Press DOWN again to stop the actuator If DOWN is pressed while the actuator is extending, it will reverse direction and begin to retract Remote Synchronization Process Open the control box and press the white button....
Open the catalog to page 3
