PA-31
PA-31
- Input Voltage: 12VDC
- Control Ability: Single Channel Control
- Output Power: 20A
- Kit Includes: 2 Hand Remotes, 1 Control Box, Wire Harness
- Remote Functions: Up, Down, Pause (Momentary & Non-Momentary)
- Remote Battery Type: 2x CR2016 3V Lithium Cell
- Dimensions: 3.5" x 1.1" x 2.7"
- Weight: 0.45 lbs
- Warranty: 18 Months
- Actuator Type: DC Motor, Bi-directional
- No. Connections: 2
- Power Supply: 120/220VAC (not included)
- Wiring: RED Wire to +V, BLACK Wire to COM
- Momentary Mode: Ensure Jumper S1 on PCB is connected. Hold UP to extend, release to stop. Hold DOWN to retract, release to stop.
- Non-Momentary Mode: Ensure Jumper S1 on PCB is disconnected. Press UP to extend, press again to stop. Press DOWN to retract, press again to stop. If DOWN is pressed while extending, it reverses direction.
- Open the control box and press the white button. The blue LED will turn on.
- Press any button on the remote; the LED will turn off.
- The remote is now saved to the control box.
- A maximum of two remotes can be saved to one control box.
Catalog excerpts
Control Ability Input Voltage Output Power Current Kit Includes Remote Functions Remote Battery Type Size (L x H x W) Weight Warranty Single Channel Control 12VDC 12VDC 20A 2 Hand Remotes, 1 Control Box, Wire Harness Up, Down, Pause (Momentary & Non-Momentary) 2x CR2016 3V Lithium Cell 3.5" x 1.1" x 2.7" 0.45 lbs 18 Months
Open the catalog to page 1
Wiring Diagram Power Supply (not included) L N Type: DC Motor, Bi-directional ACTUATOR
Open the catalog to page 2
Momentary/Non-Momentary Mode Momentary Mode Ensure the Jumper S1 on the PCB is connected Hold UP to extend the actuator, let go to stop the actuator Hold DOWN to retract the actuator, let go to stop the actuator Non-Momentary Mode Ensure the Jumpers S1 on the PCB is disconnected Press UP to extend the actuator, Press UP again to stop the actuator Press DOWN to retract the actuator, Press DOWN again to stop the actuator If DOWN is pressed while the actuator is extending, it will reverse direction and begin to retract Remote Synchronization Process Open the control box and press the white button....
Open the catalog to page 3
