STRATOGEL 3D
STRATOGEL 3D
STRATOGEL 3D is a medium viscosity gel designed for use with 3D resin models in dental applications. It serves as a separating film between the 3D resin model and acrylic resin, ensuring easy application and removal.
- Easy application with a single coat using a brush.
- Does not contaminate 3D resin or acrylics.
- Easily removed with water, leaving no residue.
- Non-toxic and does not alter the properties of the resin models.
Apply one coat of STRATOGEL 3D with a brush. For rougher surfaces, a second coat can be applied after the first coat is completely dry. The gel dries to form a thin plastic layer that adheres to the acrylic resin, allowing the 3D resin model to remain clean.
- Available in 100 ml bottles and 25 ml test packs.
For more information, contact Protechno at +34 972 526 169 or visit their website at www.protechno.com.
Catalog excerpts
oour res,n . SEPARATING GEL FOR 3D RESINS ADVANCED DENTAL PRODUCTS EASY APPLICATION: APPLY JUST ONE COAT WITH A BRUSH • DOES NOT CONTAMINATE THE 3D RESIN OR ACRYLICS EASILY REMOVED WITH WATER
Open the catalog to page 1
MEDIUM VISCOSITY GEL TO BE APPLIED ON THE SURFACE OF THE 3D RESIN MODEL.ADVANTAGES • Easy application: a single coat is applied with a brush • Creates a very thin separating layer • Does not contaminate 3D resin or acrylics • Easily removed with water DESCRIPTION The gel, despite its viscosity, spreads easily over the surface and when it dries it creates a thin plastic layer. STRATOGEL acts as a separating film between the 3D resin model and the acrylic resin. The product is supplied with the correct viscosity to be effective with a single coat. However, a second layer can be applied on top of...
Open the catalog to page 2All PROTECHNO catalogs and technical brochures
DUPLIFLEX 182 Pages
BB CURE2 Pages
PROTEC-FIX2 Pages
CATALOGUE 2025108 Pages