Ceilling Rail Systems
38Pages

{{requestButtons}}

Catalog excerpts

Ceilling Rail Systems - 1

Ceiling Infusion Systems

Open the catalog to page 1
Ceilling Rail Systems - 2

Ceiling Infusion Systems

Open the catalog to page 2
Ceilling Rail Systems - 3

Ceiling Infusion Systems + flexible + variable + resilient

Open the catalog to page 3
Ceilling Rail Systems - 4

General Product Introduction Ceiling Infusion Systems Provita ceiling rail systems always provide sufficient room shelves, power outlet strips, potential equalisation rings, for patient care, whether in a hospital, care room or in a component plates and monitor shelves are all available to medical practice. Even in the smallest of spaces, provita choose from. ceiling rails give staff the required freedom of motion and thus ensure that patients receive optimal care. As a complete supplier of the ICS 1, ICS 2 and ICS 4 ceiling rail systems and the ICS 3 IV holder system, provita has Through...

Open the catalog to page 4
Ceilling Rail Systems - 5

Ceiling Infusion Systems Many product advantages to your benefit ICS 1 + ICS 2 ++ceiling-supported systems for a flexible infusion and ++compact, light rail profile for gravity infusion device management with a maximum freedom of space on the floor ++adequate interior design thanks to individual configurability ++provides unhindered access to the patient thanks to a multifunctional room use ++the medical rail system is suitable for every room condition and available in any desired length ++in case of intermediate ceilings (suspended ceilings) the rail is statically secured and easily...

Open the catalog to page 5
Ceilling Rail Systems - 6

Technical data overview Ceiling IV-Poles ++pivotable support arm solution with a work field of ++guarantees a safety hanging of the infusion bottles ++optimal use of space as well as maximal freedom movement near the patient ++integrated power supply ++secured rotation-lock for the protection of the internal during the patient care ++portable and versatile: the working area around the patient can be arranged suiting the application ++partly with central-brake (with oil-resistant handle, large grip space and soft components) at the end of Ceiling Infusion Systems preamble care ++high load...

Open the catalog to page 6
Ceilling Rail Systems - 7

ICS 1 Ceiling Rail System for gravity infusion ICS 2 Ceiling Rail System for infusion- and device management ICS 2 Ceiling Rail Systems Ceiling Rail Systems „Mono-Set“ and „Duo-Set“ Das Urheberrecht an dieser Zeichnung verbleibt bei Fa. PROVITA. Ohne Genehmigung ist weder eine Vervielfältigung noch Weitergabe an Dritte zulässig. Auf Paragraph 97ff und 110ff UrhG wird ausdrücklich hingewiesen. Diese Zeichnung wurde mit CAD erstellt. Änderungen von Hand sind nicht zulässig. Maße ohne Toleranzangabe nach DIN 7168m Werkstückkanten DIN 6784 Datum Bearb. ICS 3 Pivotable support arm for infusion...

Open the catalog to page 7
Ceilling Rail Systems - 8

ICS 4 Rail System with integrated power supply for infusion- and device P. 136 ICS 3 + ICS 4 Accessories Various accessories for completion of ceiling systems Ceiling Infusion Systems

Open the catalog to page 8
Ceilling Rail Systems - 9

ICS 1 Ceiling Rail System for Gravity Infusion Ceiling Rail Straight ++compact, light and optical appealing profile Material aluminium, anodized Profile size Load capacity special lengths available on request Ceiling Rail U-Form Material aluminium, anodized Profile size connectors and 2 end pieces Weight standard size special sizes available on request Instructions for installation please see p. 192

Open the catalog to page 9
Ceilling Rail Systems - 10

ICS 1 Ceiling Rail System for Gravity Infusion as end lock for the rail system to insert the sliding hook even when the rail to connect two ceiling rails finishes directly at the wall stainless steel for security reasons an end piece is requested in front of the D-cut Ceiling Infusion Systems

Open the catalog to page 10
Ceilling Rail Systems - 11

When assembling the rail below suspended ceilings, we recommend to use the provita substructure. The four part U-shaped rail system must be fastened in seven different places by substructure spacers. The order of the spacers should comply with the layout shown in the sketch - each of them 90° turned to the next one – so that a strong construction will be given in all directions. An essential requirement for security and optimal functionallity of our rails is the proper and professional assembly of the spacers and rails. Substructure spacers for distance 200 to 500 mm – Version C distance...

Open the catalog to page 11
Ceilling Rail Systems - 12

Ceiling IV-Pole Series I1001 / I1021 ++easy and safe adjustable by single-handed safety adjustment stainless steel Tube diameter Bottle holder stainless steel 4 safety hooks 2,0 kg / hook, 15,0 kg / sliding hook, 15,0 kg / IV-Pole single-handed height adjustment room height regulating range Ceiling Infusion Systems base version thread* Regulating range Height adjustment with thread for pump holder (Z2N06342) Sliding Hook only for ICS 1 rail, to hang the IV-Pole into to be screwed on the lower part of the handle stainless steel Locking ring stainless steel from sliding-off Weight Ceiling...

Open the catalog to page 12
Ceilling Rail Systems - 13

ICS 2 Rail System for Infusion- and Device Management Ceiling Rail Straight ++sturdy, high-grade profile for high loads Material Profile size user-defined by use of connectors (max. 4.000 mm one-piece) Load capacity special lengths available on request, standard length 1.000 mm, colour white, coated special lengths available on request, colour white, coated Instructions for installation please see p. 192

Open the catalog to page 13
Ceilling Rail Systems - 14

Rail System for Infusion- and Device Management Ceiling Rail U-Form Material aluminium U-Size 2.100 x 1.400 mm (additional sizes available, the minimum width of Features incl. 2 end caps and 3 connectors, incl Weight for standard length appr. 3,7 kg D3FB001W standard size, anodized D3FB001W-X special sizes available on request, ano- D3FB001A standard size, colour white, coated D3FB001A-X special sizes available on request, colour white, coated rail end cap, with screws Material plastic end-lock for rails, prevents the drop-out of IV-poles at D-cut sections Material aluminium to adopt the...

Open the catalog to page 14
Ceilling Rail Systems - 15

ICS 2 „Mono-Set“ ++moveable and versatile: working area near the patient, can be arranged in an userfriendly way Number of ceiling rails 2 rails (parallel) + 1 connecting rail Length of parallel rails Length of connecting rail white, coated „Mono“ Supporting rail Material for parallel ceiling rail systems 16 nylon-ball-bearing (4 pieces in each carrier unit) Distance between parallel rails Number of ceiling rails Length of ceiling rails Distance between ceiling rails Ceiling device duorail 1 and 2 tandem carrier units each Equipment of ceiling device variable D2DUOS1A D2DUOS1W white, coated...

Open the catalog to page 15

All Provita medical catalogs and technical brochures

  1. ATLAS

    1 Pages

  2. Components

    23 Pages

  3. Wall systems

    44 Pages

  4. S0111902

    2 Pages

  5. I-NL1121

    2 Pages

  6. L127079A

    2 Pages

  7. lamps

    29 Pages

  8. L220222A

    2 Pages

  9. L320112S

    2 Pages

  10. L530067A

    2 Pages

  11. L527077A

    2 Pages

  12. L527067A

    2 Pages

  13. L525077A

    2 Pages

  14. L525067A

    2 Pages

  15. Peadiatric

    2 Pages

  16. Infuboy

    2 Pages

  17. provi-VIEW

    2 Pages

  18. IV poles

    62 Pages

  19. L111181A

    1 Pages