IT and Infusions Mouting Solutions
16Pages

IT and Infusion Mounting Solutions

IT and Infusion Mounting Solutions

IT and Infusion Mounting Solutions + space-saving + quick + functional

General Product Introduction IT and Infusion Mounting Solutions In an intensive care unit, all of the devices required in the devices required for patient care. The vertical support sys- provision of medical care must be immediately at hand and tem, which is mounted to the wall, offers further support. it must be possible to move them quickly into the required Through using the appropriate accessories, standard rails position. However, when not required, they must not hinder to hold additional medical equipment, cabling, monitors and treatment in any way. They must therefore be mounted in a...

IT and Infusion Mounting Solutions Many product advantages to your benefit IT Mounting Solutions Infusion and Pump Mounting Solutions ++for monitors made by Philips, Dräger, Siemens ++wall supported, swiveling system permits an easy ++backside or bottom fixation of the monitor ++available in fixed or adjustable in height versions ++minimized required space while maximizing efficiency ++integrated cable guiding ++easy-to-clean and smooth surface with anti-microbial powder-coat positioning change of medical devices in or out the work field ++easy-to-clean surface (wipe disinfection) Vertical...

IT and Infusion Mounting Solutions Technical data overview

IT Mounting Solutions Mounting systems for efficient P. 182 monitoring in daily clinical practice Infusion and Pump Mounting Solutions Practical and user-friendly infusion P. 184 Assembling Solutions Professional connection of devices P. 186 and monitors in Intensive Care Units Vertical Mounting Solution Space saving positioning of medical devices IT and Infusion Mounting Solutions

Monitor Support Arm Fixed Height Monitor Support Arm Height Adjustable for » PHILIPS « monitors, constant viewing angle, by parallel guide track of the height adjustable arm Swing angle Swing angle silver anodized silver anodized to mount on wall rails 25 × 10 mm When ordering, please indicate the monitor weight, so that the to mount on round tube ∅ 38 mm spring can be adjusted in the factory. Z-DOCK12 t o mount on wall rails 25 × 10 mm to mount on round tube ∅ 38 mm

Monitor Support Arm Fixed Height Monitor Support Arm Height Adjustable for » DRÄGER / SIEMENS / GE « monitors for » DRÄGER / SIEMENS / GE « monitors Swing angle Swing angle silver anodized silver anodized ATTENTION: for models of series GE iMM LCD 15, GE iMM When ordering, please indicate the monitor weight, so that the Compact, GE Dinamap V 100, Procare, special mounting boards are spring can be adjusted in the factory. necessary. Please order them separately. ATTENTION: for models of series GE iMM LCD 15, GE iMM Compact, GE Dinamap V 100, Procare, special mounting boards are necessary....

Infusion and Pump Mounting Solutions for further wall mounted IV-Pole options, please see page 86 two swiveling holding arms with universal clamp, two single handed operated IV-Poles, for mounting to a central tube single handed operated IV-Pole stainless steel / aluminium stainless steel / aluminium Tube diameter Tube diameter Bottle holder 4 safety bottle hooks Bottle holder 4 safety bottle hooks Total weight (net weight) Total weight (net weight) Regulating range Regulating range

Infusion and Pump Mounting Solutions Swiveling Pump Holding System Pump Holder for Vertical Rail for mouting on vertical support tube, with 2 universal clamps for mounting onto a vertical wall rail 25 × 10 mm stainless steel / aluminium by two height adjustable mounting brackets Tube diameter stainless steel / aluminium Tube diameter Total weight (net weight) Total weight (net weight) Inclining Pump Holder for Wall Mounting Pump Holder for Wall Mounting for flush wall mounting with two wall mounts stainless steel / aluminium Tube diameter Tube diameter IT and Infusion Mounting Solutions...

Assembling solutions The extensive use of medical devices, such as patient monitoring in ICS require a wide range of useful mounting systems. star-shaped grip Central distances Clamp Material Distance between medical rail and round tube Bracket for Round Tube Ø 38 mm Material Length Mounting holes

Assembling Solutions to plug into universal clamp Z2N6641S, option is available to adapt onto round tube ∅ 38 mm Distance between tube Central distance Tubes sockets With socket Total weight (net weight) Universal Clamp Universal clamp for wall rails and round tubes up to Ø 40 mm, for installation on wall rails 25 × 10 mm or round tube with 4 drill holes at the back Total weight (net weight) Total weight (net weight) socket for round tube ∅ 18 mm socket for round tube ∅ 25 mm Mounting Tube with Universal Clamp for mounting of infusion pumps as well as other medical devices universal clamp...

Vertical Mounting ■TAINLESa SlbfcL Vertical Mounting System * Germany + the vertical mounting system provides an ergonomic and space-saving positioning of medical equipment - next to the patients

Vertical Mounting Solution Wall Rail Material stainless steel plastic / black Rail profile Total load capacity Weight (per running meter) appr. 1,5 kg Unique feature intermediate and special lengths‘ are possible (please specify detailed dimensions) • plastic parts optional in blue or white • osettes made of stainless steel r (Z2N06242) • ith 1 grounding pin on each rail w • reely positionable grounding box f (Z2N06132) Horizontal Rail Material stainless steel aluminium, coated special lengths available on request Monitor Shelf without Drawer with two medical rail clamps and wall supports,...