Medical Rail Systems

Medical Rail Systems

Medical Rail Systems + unobtrusive + tidy + many variants

General Product Introduction Medical Rail Systems Different rooms, different walls - one solution: Medical rail By combining the provita wall mounted rail systems with systems from provita. The systems ensure the tidy, the pivoting IV unit or the sliding medical rail trolleys, further functional attachment of medical devices by your side. Rails flexibility and freedom of movement can be provided for can be produced according to your specification to suit any patients, nursing staff and doctors. hospital ward or medical practice. The rails, made from polished stainless steel, can bear a load of...

Medical Rail Systems Many product advantages to your benefit Medical Rail ++space-saving infusion and device management on any wall - in any room ++flexible arrangement of necessary caring devices ++the screwing discs with holed drills enable a quick and simple mounting ++full access to the patient thanks to a maximum floor freedom ++reduced risk of injury (risk of stumbling) ++connectors made of high quality brass guarantees electrical conductivity over the entire length of the rail ++the way it is delivered permits a time-saving assembly of the rail ++the wall rail profile has a load capacity...

Technical data overview Medical Wall Rail Carrier Unit ++effective infusion care by hanging safely IV-bottles ++low-noise movement of IV-Poles and medical devices ++safe use above and below light strips and care channels ++all plastic elements are non-fading ++enough safe distance in between both tubes once the pole reached its lowest height as a precaution of risk of injury (e.g. to avoid finger traps) ++IV-Poles with parallel offset: additional infusion bags or bottles can be hung on the safety bottle holder through the parallel angles of the inner tube without affecting the functionality of...

Medical Rail Medical Rail for space-saving device P. 154 IV-Poles Professional infusion management on P. 156 Medical Rails IWS-System and Medical Wall Rail Carrier Unit Pivotable, moveable device support system for infusion and device management Medical Rail Systems Accessories Various accessories to enhance the P. 168 wall rail system

Medical Rail Wall Rail ++easily fixed to wall by rotatable pre-drilled fixings stainless steel plastic / black Rail profile Total load capacity special lengths on customer request Weight (per running meter) appr. 1,5 kg Unique feature intermediate and special lengths‘ rails longer than 3.000 mm will be connected using connectors are possible (please specify detailed dimensions) optional • plastic parts in blue or white • osettes made of stainless steel r • ith 1 grounding pin on each rail w • ith freely positionable grounding box w (Z2N06132) E2N4464- The type of mounting needs to be evaluated...

Medical Rail Planning Tool Please use the provita planning tool for medical rails. You will save valuable time working on your projects. Medical Rail Systems www.provita.com/railplanner Medical rail-planning tool

Series 44 IV-Poles Leseleuchte Overview IV-Poles IV-Pole with 2 wall supports I2002612 with 4 safety bottle hooks, screw height adjustment IV-Pole, 55° angled I2000572 with bottle bar 4 safety bottle hooks, screw height adjustment IV-Pole straight I2000422 with 4 safety bottle hooks, screw height adjustment IV-Pole, 90° angled I2000552 outer tube 1.000 mm, screw height adjustment I2000562 outer tube 1.500 mm, screw height adjustment 156

IV-Pole Overview Overview IV-Poles ICU-Unit I1009272 with 4 safety bottle hooks, singlehanded safety height adjustment I1009292 with 6 safety bottle hooks, singlehanded safety height adjustment IV-Pole I1000502 without wall support, single-handed safety height adjustment I1000522 with wall support, single-handed safety height adjustment IV-Pole I1002112 single-handed safety height adjustment I2000112 screw height adjustment IV-Pole angled I1002212 single-handed safety height adjustment I2002012 screw height adjustment Medical Rail Systems IV-Pole I1002712 single-handed safety height adjustment...

IV-Pole with 2 wall supports ++safe use above and below light strips and care channels stainless steel Tube diameter Bottle holder stainless steel 4 safety bottle hooks Load capacity Parallel offset Outer tube length Regulating range Height adjustment screw height adjustment Distance wall to tube center Total weight (net weight) IV-Pole straight ++effective infusion care by hanging safely IVbottles and bags stainless steel Tube diameter Outer tube length Height adjustment screw height adjustment Bottle holder stainless steel 4 safety bottle hooks Regulating range Load capacity Total weight (net...

IV-Pole, 55° angled ++prevented penetration of liquids between both tubes by a patented sealing cap stainless steel Tube diameter Outer tube length Parallel shift Height adjustment screw height adjustment Regulating range Bottle holder stainless steel 4 safety bottle hooks Load capacity Total weight (net weight) IV-Pole, 90° angled ++enough safe distance in between both tubes stainless steel Tube diameter Parallel shift Height adjustment screw height adjustment Bottle holder stainless steel 6 safety bottle hooks Load capacity Total weight (net weight) outer tube length 1.000 mm Medical Rail Systems...

ICU-Unit ++adjustment of the telescopic tube through a comfortable single-handed height adjustment stainless steel / aluminium Height adjustment single-handed safety height adjustment stainless steel 4 or 6 safety bottle hooks – 2,0 kg / hook Regulating range Total weight (net weight) with medical rail clamp, for assembling onto wall rails 25 × 10 mm with 4 safety bottle hooks with 6 safety bottle hooks IV-Pole ++stainless steel tubes in accordance with DIN EN 10217-7 stainless steel / aluminium Tube diameter Height adjustment single-handed safety height adjustment Bottle holder stainless steel...

IV-Pole ++all plastic elements are non-fading Material stainless steel / aluminium Tube diameter Bottle holder stainless steel 3 safety bottle hooks – 2,0 kg / hook Regulating range Outer tube length Total weight (net weight) with wall rail clamp and wall support, for assembling onto medical rails 25 × 10 mm single-handed safety height adjustment screw height adjustment IV-Pole – angled Medical Rail Systems ++additional infusion bags or bottles can be hung on the safety bottle holder through the parallel angles of the inner tube stainless steel / aluminium Tube diameter Bottle holder stainless...