PTS Connect®
9Pages

User Guide Designed exclusively for use with CardioChek® Plus analyzers, CardioChek PA analyzers (versions 2.55 and greater), and PTS Connect Blu-Dock™ devices.

Important Safety Instructions Warning 1. Only use the AC adapter provided with this printer, or an AC adapter that has been approved for use with this printer. Use of an incorrect AC adapter may cause risk of overheating or fire. 2. Do not bend or place a heavy object on the power cord as it could damage the cord and result in risk of electric shock or fire. Do not use the power cord if damaged or frayed. 3. The thermal print head may become quite hot after printing. Be careful when changing labels and cleaning the thermal head. Caution 1. Never insert objects of any kind into this printer...

7. When the printer is unused for a period of time without a label, the platen rubber may become stuck. This condition may cause a fatal error in the printer mechanism. To avoid this, please keep a label loaded in the printer — even when not in use. 8. Do not use the printer without closing the print engine cover. Contents Materials Provided REF 2750 PTS Connect® Printer (1) (PTS Connect Printer user guide included) REF 2759 PTS Connect Printer Power Supply (version included in box may very by territory) REF 2151 PTS Connect Printer Label Roll REF 2757 PTS Connect Printer USB Cable (for use...

How to Set Up the CardioChek Analyzers for Printing CardioChek PA Analyzer 1. If the analyzer is off, press either button to turn on the analyzer. Wait for the display to read INSTALL MEMO CHIP or INSERT STRIP. Note: If RUN TEST is displayed, go to Step 3. 2. Ensure both power supply and communication cables are connected. 3. Press Next. The display will read RUN TEST. 4. Press Next until SETTINGS is displayed. 5. Press Enter. PRINT is displayed. 6. Press Enter. PRINT MEDIA is displayed. 7. Press Enter to select LABEL, or Next then Enter to select PAPER and return to PRINT MEDIA. 8. Press...

Loading a Roll of Labels Changing a Label Roll Prepare the roll of labels Roll 1. Remove the sticker from the beginning of the roll of labels. Note: Make sure there is a black sensor mark on the label backing. 2. If needed, cut between the labels Prepared End to create a “leader.” 3. If the end of the roll is not prepared as shown above, cut between the labels leaving as much backing as possible. Warning: Do NOT throw spindle away when changing label rolls. This procedure describes how to remove and replace label rolls. • When you run out of labels, the green status light on the front of...

Removing Stuck Labels Caution: Do NOT touch print engine. It may be hot. If a label becomes stuck in your printer, remove it as follows: 1. Make sure that the printer is turned off. If the Status Light is on, hold the Power Button until the printer is turned off. 2. Swivel the Roll Cover open. With a pair of scissors, cut the label stock between the label roll and the paper inlet slot. 3. Remove the Print Engine Cover by pulling it toward you while pressing the left and right side of the Print Engine Cover. 4. Release the pressure on the label stock by moving the Platen Release Lever...

Status Light Indicators The PTS Connect printer is a compact printing device specifically designed for label printing with the CardioChek PA and CardioChek Plus analyzers and Blu-Dock devices. Environment Temperature Humidity Direct thermal 300 dpi (11.81 dots/mm) 2.28 in. (57.9 mm) 1.92 in. (48.8 mm) 100 mm/sec max 650 USB DC 11.4 V to DC 12.6 V 2.8 A (Normal) 3.0 A (Maximum) 4.48 in. (W) x 6.77 in. (D) x 5.83 in. (H) 113.8 mm (W) x 172.0 mm (D) x 148.0 mm (H) Approx. 1.08 lbs. (490 g) 15 km Power off/Standby Steady Green Printer Technology Resolution Max. Paper Width Max. Printable Width...

Technical Support and Ordering Labels and Parts For assistance, please contact PTS Diagnostics Customer Service (M-F, 8:00 a.m.- 8:00 p.m. US EST) or your local authorized CardioChek dealer. PTS Diagnostics 4600 Anson Boulevard, Whitestown, IN 46075 USA Direct: +1-317-870-5610 · Toll-free inside the US: 1-877-870-5610 Fax: +1-317-870-5608 Email: customerservice@ptsdiagnostics.com · Website: ptsdiagnostics.com REF 2750 REF 2759 REF 2151 REF 2757 PTS Connect Printer PTS Connect Printer Power Supply (version included in box may very by territory) (for use with CardioChek Plus analyzers only)...

Polymer Technology Systems, Inc. 4600 Anson Boulevard, Whitestown, IN 46075 USA Direct: +1-317-870-5610 · Toll-free inside the US: 1-877-870-5610 · Fax: +1-317-870-5608 Email: customerservice@ptsdiagnostics.com · Website: ptsdiagnostics.com CardioChek, MEMo Chip, and PTS Connect are trademarks of Polymer Technology Systems, Inc. All other trademarks and product names are the property of their respective owners. © Copyright 2021 Polymer Technology Systems, Inc. PS-004527 EN Rev. 5 10/2