Pulmeq sp. z o.o. Mieszka I 66c 66-400 Gorzów Wielkopolski Poland www.pulmeq.com Product Description A disposable filter consisting of a case made of medical polypropylene and a filter form closed in it. The filter is used in the spirometry test, protecting the device against contamination by the patient - pathogens and aerosols generated when air is blown into the device. It is also an element of increasing the hygiene of the examination by protecting both: the patient and the device from cross-contamination. Technical Specifications Material (case) Material (fabric) Package Storage Product class Filtration level Filtration area Flow resistance Death space 100 % Polypropylene Non-woven polypropylene, electrostatic Foil BBOP, cardboard box Temperature 5-300C, relative humidity <75% IIa, rule 5 Bacteria - 99,99% at 30 l/min* Viruses - 99,98% at 30 l/min* 53,29 cm2 All filter models meet the requirements of ISO 26782 in terms of flow resistance for spirometry accessories. The maximum allowable resistance, according to the standard, is 1.5 cm H20 at 14 l / s. PQFS-28 58,1 cm3 * Based on research by Nelson Laboratories , LLC Size chart Filter model PQFS-28 MIR (Spirolab, Spirobank, MirSpir) SpiroUSB Vitalograph (all models) Microlab (Viasys) abcMED (Pneumo) PQFS-30 MES (Lungtest) PQFS-30S Aspel (Spiro 31) Jeager EasyOne* Diameter on the patient's side (mm) Diameter on the device's side (mm) Product technical sheet v.1.4 from 07.06.2022