*mymedicalexpo

Catalogs
Pulpdent Corporation
DRY-RITE / SILANE BOND ENHANCER

DRY-RITE / SILANE BOND ENHANCER

Product catalog summary

Product Information
Trade Name: Ethanol-based Materials: DRY-RITE / SILANE BOND ENHANCER
Manufacturer: Pulpdent Corporation, Watertown, MA, USA
Application: Dental material for professional use
Emergency Contact: 1-800-535-5053 (USA)

Hazards Identification
Classifications: Flammable liquid (Category 2), Eye irritation (Category 2), STOT SE (Category 3), Skin irritation (Category 2)
Signal Word: DANGER
Hazard Statements: Highly flammable, causes serious eye and skin irritation, may cause respiratory irritation.

Composition
Main Ingredients: Ethyl alcohol (92%), Acetone (7%)
Both classified as flammable and irritant.

First Aid Measures
Eye Contact: Rinse with water for 15+ minutes, seek medical attention.
Skin Contact: Wash with soap and water, seek medical attention if irritation persists.
Inhalation: Move to fresh air, seek medical attention if necessary.
Ingestion: Rinse mouth, do not induce vomiting, seek immediate medical attention.

Fire Fighting Measures
Extinguishing Media: Dry chemical, alcohol foam, carbon dioxide.
Special Hazards: Carbon monoxide and dioxide from incomplete combustion.
Protective Equipment: Self-contained breathing apparatus.

Accidental Release Measures
Personal Precautions: Wear goggles and gloves.
Environmental Precautions: Avoid large releases into the environment.
Cleanup: Ventilate area, use absorbent material, store waste in closed containers.

Handling and Storage
Handling: For dental professionals only, avoid ignition sources.
Storage: Store in a cool, ventilated area, avoid extreme temperatures.

Exposure Controls/Personal Protection
Exposure Limits: Ethanol (1000 ppm), Acetone (750 ppm)
Protection: Use gloves, safety glasses, and ensure good ventilation.

Physical and Chemical Properties
Appearance: Dry-Rite (Pink liquid), Silane (Clear liquid)
Odor: Sweet, ethanol odor
Boiling Point: 78.3°C
Flash Point: 6°C
Solubility: Dry-Rite (Complete), Silane (Slight)

Stability and Reactivity
Conditions to Avoid: Heat, sparks, open flame.
Materials to Avoid: Acetyl chloride, oxidizing agents.
Decomposition Products: Carbon monoxide, carbon dioxide.

Toxicological Information
Acute Toxicity: Minimal under normal use.
Irritation: May cause eye and skin irritation.
Carcinogenicity: Not a carcinogen under normal use.

Ecological Information
Follow good practices and regulations to avoid environmental release.

Disposal Considerations
Dispose according to local and national regulations.

Transport Information
UN Number: 1170
Packing Group: II
IATA Class: 3

Regulatory Information
EU: Dry-Rite (Class I), Silane (Class II)
US FDA: Class II medical devices
Health Canada: Dry-Rite (Class I), Silane (Class III)

Other Information
Revised to meet GHS SDS format and regulations.

1. Specifications and Composition
PULPDENT KOOL-DAM is a dental material composed of aliphatic and polyurethane dimethacrylate oligomer/monomer in a light-cured, glass-filled paste. It contains hazardous ingredients such as aliphatic and polyurethane dimethacrylate oligomer/monomer (55-65%) and amorphous silica (5%). These components are classified as irritants and may cause eye, skin, and respiratory irritation.

2. Safety and Handling Procedures
In case of skin contact, wash with soap and water. If irritation occurs, seek medical attention. Protect the product from sunlight and store it at temperatures not exceeding 27°C (80°F). For first aid, move affected individuals to fresh air, wash skin thoroughly, and flush eyes with water. In case of ingestion, rinse the mouth and seek immediate medical attention.

3. Fire Fighting Measures
Suitable extinguishing media include carbon dioxide, dry chemical, alcohol foam, or water fog. Avoid using direct water streams. Firefighters should wear self-contained breathing apparatus.

4. Accidental Release Measures
Ventilate the area and wear safety glasses, gloves, and a lab coat. Absorb spills with suitable materials and dispose of them in a covered container. Clean the spill area with alcohol or soap and water.

5. Handling and Storage
Only dental professionals should use this product. Store it tightly capped in its original container at cool room temperature, avoiding direct light and temperature extremes. The shelf life is two years if stored properly.

6. Exposure Controls and Personal Protection
No special equipment is required under normal use. General ventilation is sufficient, and standard surgical gloves and safety glasses are recommended. An emergency eye wash fountain should be available.

7. Physical and Chemical Properties
The product is a light blue gel with a faint odor. It has a specific gravity of 1.290 and is insoluble in water.

8. Stability and Reactivity
Avoid temperature extremes and intense light. Hazardous polymerization may occur under fire conditions, releasing carbon monoxide and dioxide.

9. Toxicological Information
The product is not toxic in the quantities present and under normal use. It may cause irritation and sensitization with prolonged exposure.

10. Regulatory Information
PULPDENT KOOL-DAM is classified as a Class I medical device in the EU and US, and a Class III medical device in Canada.

Handling and Storage

For dental professionals only. Keep tightly capped in original container. Avoid adding other materials. Empty containers may contain explosive or flammable residue.
Do not consume food or drink or smoke while handling. Wear protective gloves and goggles. Avoid contact with eyes, skin, or clothing. Wash hands after use.
Store in a cool, dry, well-ventilated area, avoiding water, heat, sparks, flame, organic substances, and direct sunlight.

Exposure Controls / Personal Protection

PEL/TLV for HF is 3 ppm; TWA for Alcohol is 1000 ppm.
Use eye protection and chemically impervious gloves. No special respiratory protection is required for small quantities, but use local exhaust ventilation to maintain exposure below 3 ppm.
For large amounts of hydrofluoric acid, use self-contained breathing apparatus if limits are exceeded.
Wear neoprene or polyethylene gloves, safety glasses or face shield, and protective clothing.
Use rubber dam and high-speed evacuator tip for in vivo use. Ensure emergency eye wash is available.

Physical and Chemical Properties

Appearance: Transparent yellow gel
Odor: Characteristic
pH: <1.5
Boiling Point: 108.33°C
Solubility in water: 100%

Stability and Reactivity

Avoid extremes of temperature, sparks, open flame, and contamination.
Incompatible with water, glass, concrete, silicon-containing materials, carbonates, sulfides, cyanides, alkalis, bases, reducing agents, nitric acid, organic materials, and metals.
Strong exothermic reaction with incompatible substances.

Toxicological Information

Hydrofluoric acid is highly toxic and causes severe burns. Sensation may be delayed.
Not a sensitizer and unlikely to cause prolonged toxicity in the available quantity.
No known carcinogenic, mutagenic, or reproductive toxicity effects.

Ecological Information

Strong acid that can damage wildlife or aquatic ecosystems. Avoid flushing large amounts into sewer systems or bodies of water.

Disposal Considerations

Follow local and national regulations for disposal of material or contaminated packaging.

Transport Information

UN Number: 1790
Class: 8, 6.1, Packing Group II
Label: Hydrofluoric Acid Preparation; Corrosive! Toxic!
Maximum unit quantity for air transport: 30 ml

Regulatory Information

EU: Class I medical device
US FDA: Class II medical device
Health Canada: Class III medical device

Other Information

Contains hazard statements and precautionary measures for safe handling.
Intended for use by dental professionals only.

Catalog excerpts

Pulpdent Corporation Revision Date: June 14, 2022 Safety Data Sheet Trade Name: Ethanol-based Materials: DRY-RITE / SILANE BOND ENHANCER 1.0 Commercial Product Name and Supplier Commercial product name / designation Application / Use SIC Use Category Manufacturer Pulpdent Corporation 80 Oakland Street P.O. Box 780 Watertown, MA 02472 USA Dry-Rite Drying Agent Silane Bond Enhancer Dental material for use by dental professionals. 851 Human health activity 55 Emergency Telephone Number European Authorized Representative Advena Limited Tower Business Centre, 2nd Floor, Tower Street, Swatar, BKR 4013 Malta Advena Limited Pure Offices, Plato Close Warwick, CV34 6WE United Kingdom MedEnvoy Switzerland Gotthardstrasse 28, 6302 Zug, Switzerland Hazards Identification Classification according to Regulation (EC) No. 1272/2008 [CLP] Hazard Class GHS Label Elements Hazard Pictograms Signal Word: DANGER Restricted to use by dental professional only Hazard Statements: H225: Highly flammable liquid and vapor. Category 2. H319: Causes serious eye irritation. Category 2. 1/6 Skin irritation (See SECTION 16 for full text of risk phrases) Classification according to Directive 67/548/EEC Hazard Statement Flammable liquid Hazard Category

Open the catalog to page 1

Pulpdent Corporation Revision Date: June 14, 2022 Safety Data Sheet Trade Name: Ethanol-based Materials: DRY-RITE / SILANE BOND ENHANCER H335: Specific Target Organ Toxicity (STOT), single exposure, respiratory tract, Category 3: May cause respiratory irritation. H315: Causes skin irritation. Category 2. Precautionary Statements: P210: Keep away from heat, sparks, open flame, hot surfaces. No smoking. P403+P233: Store in a well-ventilated place. Keep container tightly closed. P261: Avoid breathing fumes. P280: Wear protective gloves/ clothing and eye protection. P304+P340: If inhaled, remove...

Open the catalog to page 2

Pulpdent Corporation Revision Date: June 14, 2022 Safety Data Sheet Trade Name: Ethanol-based Materials: DRY-RITE / SILANE BOND ENHANCER Symptoms Contact with material may cause irritation or redness in eyes or on skin. Inhalation may cause irritation of respiratory tract. Exposure to ethanol >1000 ppm may cause headache, drowsiness, lassitude, appetite loss. Persons with chronic respiratory or skin disease are at increased risk with prolonged and/or repeated contact. Same as above under First Aid Fire Fighting Measures Suitable extinguishing media Use dry chemical, alcohol foam, or carbon dioxide....

Open the catalog to page 3

Pulpdent Corporation Revision Date: June 14, 2022 Safety Data Sheet Trade Name: Ethanol-based Materials: DRY-RITE / SILANE BOND ENHANCER 8.2.1.5 Other controls Emergency eye wash fountain should be close by. Wash hands after use. Do not eat, drink or smoke. Environmental exposure controls Follow all government regulations. Physical and Chemical Properties Color / Physical state Important health, safety and environmental information Boiling point Flash point Ignition temperature Explosive properties Odor threshold Vapor pressure Specific gravity Dry-Rite: Complete Silane: Slight Partition coefficient...

Open the catalog to page 4

Pulpdent Corporation Revision Date: June 14, 2022 Safety Data Sheet Trade Name: Ethanol-based Materials: DRY-RITE / SILANE BOND ENHANCER 11.4 Sub-acute, sub-chronic and prolonged toxicity No chronic health hazard under normal conditions of use. Carcinogenicity, Mutagenicity, Reproductive Toxicity Not a carcinogen under normal conditions of use. Large quantities of ethanol, ingested over time, may be carcinogenic or a cause of Fetal Alcohol Syndrome. IARC has reported a relationship between habitual drinking of significant quantities of alcoholic beverages and cancer of oral cavity, pharynx, esophagus,...

Open the catalog to page 5

Pulpdent Corporation Revision Date: June 14, 2022 Safety Data Sheet Trade Name: Ethanol-based Materials: DRY-RITE / SILANE BOND ENHANCER 16.3 Precautionary Statements P210: Keep away from heat, sparks, open flame, hot surfaces. No smoking. P403+P233: Store in a well-ventilated place. Keep container tightly closed. P261: Avoid breathing fumes. P280: Wear protective gloves/ clothing and eye protection. P304+P340: If inhaled, remove victim to fresh air and keep at rest in a position comfortable for breathing. P305+P351+P338: If in eyes, rinse cautiously with water for several minutes. Remove contact...

Open the catalog to page 6

Pulpdent Corporation Revision Date: June 14, 2022 Safety Data Sheet Trade Name: PULPDENT KOOL-DAM 1.0 Commercial Product Name and Supplier Commercial product name / designation Kool-Dam Heatless Liquid Dam & Block Out Resin Dental material for use by dental professional only. 851 Human health activity 55 Manufacturer Pulpdent Corporation 80 Oakland Street, P.O. Box 780 Watertown, MA 02472 USA Emergency Telephone Number Authorized European Representative Telephone: 1 617 926-6666, Fax: 617 926-6262 Email: [email protected] 1-800-535-5053 (24 Hour / USA) Advena Limited Tower Business Centre,...

Open the catalog to page 7

Pulpdent Corporation Revision Date: June 14, 2022 Safety Data Sheet Trade Name: PULPDENT KOOL-DAM P302+P352: If on skin, wash with plenty of soap and water. P333+P313: If irritation or rash occurs, get medical advice/attention. P410+P411: Protect from sunlight. Store at temperature not exceeding 27oC / 80oF. 3.0 Chemical characterization of the preparation Hazardous ingredients CAS Number Proprietary Name of the Ingredient Aliphatic and Polyurethane Dimethacrylate Oligomer / Monomer Amorphous silica Aliphatic and Polyurethane Dimethacrylate Oligomer / Monomer in a light-cured, glass-filled paste....

Open the catalog to page 8

Pulpdent Corporation Revision Date: June 14, 2022 Safety Data Sheet Trade Name: PULPDENT KOOL-DAM 5.4 Special protective equipment for firefighters A self-contained breathing apparatus should be worn by fire fighting personnel. Accidental Release Measures Personal precautions Ventilate area. Wear safety glasses, gloves, and lab coat. Environmental precautions Contain spilled material. Follow all government regulations. Absorb or wipe up spill with suitable material (paper towels or cloths). Collect for disposal in a covered container. Wash area of spill with alcohol or soap and water. For use...

Open the catalog to page 9

DRY-RITE / SILANE BOND ENHANCER

DRY-RITE / SILANE BOND ENHANCER

Catalog excerpts

All Pulpdent Corporation catalogs and technical brochures