DATA SHEET MINI DIA PLUS 20
1 / 4Pages

DATA SHEET MINI DIA PLUS 20 TECHNICAL INFORMATION Denomination: Brand: Model: Code: Manufacturer: Nation of production: Date of start of production in Italy: Duration of the warranty period granted by the manufacturer: Deioniser Reverse Osmosis Quality Invents miniDIA Plus Q-1010-38 Quality Invents Srl Italy Year 2010 12 Months SAFETY INFORMATION • • • • The deioniser is complies the machinery directive: 2006/42/EC. The deioniser is complies the machinery directive Safety Electrical Low Voltage: 2014/35/EU. The deioniser is complies the machinery directive Electromagnetic Compatibility EMC: 2014/30/EU. The deioniser complies with the requirements of the RoHS’s directive (Restriction of Hazardous Substances Directive): 2011/65/CE – Italian Legislative decree n. 151 of 25th July 2005. The deioniser is complies with the directive on scrapping of electrical and electronic equipment (known as RAEE) 2012/19/EU. The deioniser has a Declaration of conformity. The deioniser is equipped with Electrical Validation for Test standard IEC61010-1 Safety class: 1 Class The deioniser is equipped with overcurrent protection consist of two fuses on the power circuit. The deioniser is equipped with the installation Manual in English language. The deioniser is equipped with Manual Operator in English language. The "commissioning" of the equipment is guaranteed, as well as the instruction of the staff in charge of the use. MAINTENCE INFORMATION • • • • We guarantee the repair for a minimum of 5 years from the date of end of production. We guarantee the supply of spare parts for a minimum of 5 years from the date of end of production. We provide components and spare parts , wirings diagrams, hydraulic and functional. Headquarters of Technical Assistance : QUALITY INVENTS S.r.l. Via E. Ferrari, 23 – 20010 Arluno (MI) Tel. (+39) 02 901.72.24 eMail: help.dia@quality-group.eu QUALITY INVENTS S.r.l. Via Enzo Ferrari, 23 20010 Arluno (MI) – Italy ℡(+39) 02 901.72.24 (+39) 02 901.72.31

DATA SHEET MINI DIA PLUS 20 TECHNICAL SPECIFICATION WATER SUPPLY (within the potability limits set by the98/83 CE Directive) TDS (verified the chemical composition) SDI (Silt Density Index) LSI (Langelier Saturation Index) Water hardness Chlorine pH Pressure Flow Temperature Pretreatment DurationµQ WATER PRODUCED BY SECTION OF REVERSE OSMOSIS(@15 °C, 800 ppm NaCl, pH 8,3 e SDI 5) Hourly production Salt rejection by reverse osmosis Working pressure WATER SERVICE(Exceeds ASTM II, NCCLS grade 2 standards) Resistivity outflow Conductibility outflow TOC (Total Organic Carbon) Nominal flow...

DATA SHEET MINI DIA PLUS 20 FITTINGS In Out Discharge PLANT OPERATING AND ENVIRONMENTAL CONDITION Supply voltage Electrical frequency Adsorbed Power Fuses Temperature Relative humidity environment Need for uninterrupted power supply: Operational space Distance power outlet Type of electrical outlet Type of electrical socket protection Protection specifications Recommended hydraulic connection distance Recommended drain receiver distance Maximum drainreceiver height Minimum drain receiver diameter Volt: 230 AC ± 10% Hz: 50 KVA: 0,4 max Type: 5x20 3,15 AT °C: 10-35 %: < 80 No cm: 20 each side...

DATA SHEET MINI DIA PLUS 20 CONSUMABLE, EQUIPMENT E OPTIONAL (C/E/O) Prefilter cartridge (C) Mixed bed resin cylinder (C) Non-pyrogenic filter 0,22 µm (C) Kit DIApressure (Pressure pump) (O) UV lamp (O) Type: Code: Type: Code: Type: Code: Code: Type: Code: Manufacturer may change all the datasheet specifications without notice QUALITY INVENTS S.r.l. Via Enzo Ferrari, 23 20010 Arluno (MI) – Italy ℡(+39) 02 901.72.24 (+39) 02 901.72.31 www.q-i.it / mailbox@quality-group.eu µQ Q-1000-25 IONtank Q-1000-10 BIOguard PES for Water Q-1000-28 Q-1110-21 185 + 254 nm Q-1340-02