*mymedicalexpo

Dental Test Phatoms

Product catalog summary

Product Overview:
The document describes the QUART dent/digitest series, which are universal test phantoms used for dental imaging systems, including intra-oral, OPG (Orthopantomogram), and CEPH (Cephalometric) systems. These phantoms are designed to test various parameters such as radiation field, line pair resolution, low contrast, artefacts/homogeneity, and dose equivalency.

Specifications:

QUART dent/digitest 2.0/3.0: Features include a 2-point fitting for CEPH systems, a V-slot for an optional OPG holder, centring rings of different diameters, slots for digital storage screens, intra-oral sensors, and dose detectors. It includes a 45° line pair test with various resolutions and low contrast objects. Integrated filtration is provided by 6mm Al with 99.5% purity. Model 3.0 includes an integrated grey step test.
QUART dent/digitest 2.1/3.1: Similar to the 2.0/3.0 models but with an open bottom segment for easier sensor cable management. Model 3.1 also includes an integrated grey step test.
QUART dent/digi H: A universal phantom holder for OPG systems, featuring a holder plate with a screw for solid fixing and changeable pins for flexibility. It is available in standard or manufacturer-specific versions for various brands.

Standards and Conformance:
The products conform to several standards, including V 6868-151, 6868-5, 61223-3-1, 61223-2-7, S 5420-11, and S 5420-5.

Additional Information:
The document is copyrighted by QUART Medizintechnische Geräte GmbH, located in Zorneding, Germany.

Catalog excerpts

Universal OPG Testing dent/digitest 2.0/2.1 dent/digitest 3.0/3.1 dent/digi H Test Phantom Test Phantom Universal Test Phantom, separable (intra-oral / OPG / CEPH) _ 2-point fitting for CEPH systems _ V-slot for optional dent/digi H OPG holder (see below) _ 3 Centring Rings with different diameters _ Slots for digital storage screen, intra-oral sensor, dose detector _ 45° Line Pair test (2.5/2.8/3.1/5.0/5.8/6.3 Lp/mm; lead foil) _ 4 Low Contrast objects (Ø 2.5/2/1.5/1 mm) _ integrated filtration 6mm Al (purity 99.5% guaranteed) _ Model 3.0 with integrated grey step test (ÖNORM, art. no. 12105/6) Test Parameters: Radiation Field, Line Pair Resolution, Low Contrast, Artefacts / Homogeneity, Dose Equivalency Separable Universal Test Phantom with open bottom segment _ Slit to slide out intra-oral sensor without pulling the cable and/ or for a secure sensor cable routing _ 2-point fitting for CEPH systems _ V-slot for optional dent/digi H OPG holder (see below) _ 3 Centring Rings with different diameters _ Slots for digital storage screen, intra-oral sensor, dose detector _ 45° Line Pair test (2.5/2.8/3.1/5.0/5.8/6.3 Lp/mm; lead foil) _ 4 Low Contrast objects (Ø 2.5/2/1.5/1 mm) _ integrated filtration 6mm Al (purity 99.5% guaranteed) _ Model 3.1 with integrated grey step test (ÖNORM, art. no. 12107OE) Test Parameters: Radiation Field, Line Pair Resolution, Low Contrast, Artefacts / Homogeneity, Dose Equivalency Phantom Holder Standard Conformance Universal Phantom Holder for OPG systems _ Holder plate with screw for solid fixing _ Changeable pins for maximum flexibility _ Standard Version or manufacturer-specific versions available: GENDEX (Orthoralix 8500/9200) PLANMECA (Proline series) KODAK-CARESTREAM (K8000/K9000) MORITA (IC-5, Veraview) INSTRUMENTARIUM (OP 100/200) OWANDY (Imax series) SIRONA (OP 100/ 200) VATECH-EWOO (Pax/Master series) Special Service: Pin may be customised for ANY OPG system Copyright © 2008 QUART Medizintechnische Geräte GmbH ▪ Kirchenweg 7 ▪ D-85604 Zorneding ▪ Germany ▪ [email protected]

Open the catalog to page 1

Dental Test Phatoms

Dental Test Phatoms

Catalog excerpts

All QUART X-Ray QA Solutions catalogs and technical brochures

Archived catalogs