*mymedicalexpo

DDX6-WL

Product catalog summary

Solid State Dose Sensor - Technical Specifications

Introduction: This document provides the technical specifications for the Solid State Dose Sensor used with Accu-Gold+, Rapid-Gold+, and Accu-Dose+ systems.

Diagnostic Range: The sensor is designed for low dose rates, with a minimum rate of 50 nR/s and a maximum rate of 0.65 R/s. The minimum dose is 200 nR, and the maximum dose is 1.8 kR. In terms of Gy units, the minimum rate is 500 pGy/s, and the maximum rate is 5.7 mGy/s, with a minimum dose of 2 nGy and a maximum dose of 15 Gy.

Specifications / Technical Data: All specifications are subject to change. The sensor has an energy dependence of ±5% from 50 kVp to 120 kVp at 2.5 mm Al. Filtration dependence ranges from +10% to -5% from 2.5 mm Al to 23 mm Al. The accuracy is ±5% using X-rays at 80 kVp with 2.5 mm Al total filtration, as per IEC 61267 RQR-6 standards.

Catalog excerpts

Solid State Dose Sensor - Technical Specifications DDX6-WL Diagnostic range (Low dose rates) for use with: Accu-Gold+ / Rapid-Gold+ / Accu-Dose+ SPECIFICATIONS / TECHNICAL DATA: All specifications subject to change. ±5% using X-rays @ 80kVp with 2.5 mm Al total filtration (IEC 61267 RQR-6) Energy dependence: Filtration dependence: 426 West Duarte Road Monrovia, CA 91016 USA T: (626) 357-7921 F: (626) 357-8863 www.radcal.com

Open the catalog to page 1

All Radcal catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list