Technical Data Sheet NON TERMINATED MULTIPORT SWITCHES TITANIUM Series SERIES SPnT SPnT Coaxial Switches DC to 6 GHz, DC to 20 GHz, DC to 26.5 GHz, DC to 40 GHz Radiall’s TITANIUM switches are optimised to perform at a high level over an extended life span. With outstanding RF performances, and a guaranteed Insertion Loss repeatability of 0.03 dB over a life span of 2,5 million switching cycles. RADIALL TITANIUM switches are perfect for automated test and measurement equipment, as well as signal monitoring devices. PART NUMBER SELECTION R512_73__7_ RF Connectors : 3 : SMA up to 6 GHz 4 : SMA up to 20 GHz F : SMA up to 26.5 GHz 8 : SMA 2.9 up to 40 GHz (1) TYPE : 7 : Latching + Self cut-off + Auto Reset + Indicators ACTUATOR VOLTAGE : 3 : 24 Vdc DOCUMENTATION : - : Certificate Of Conformity C : Calibration certificate R : Calibration certificate + RF curves ACTUATOR TERMINAL : 7 : HE 10 receptacle, delivered with 750 mm (30 inches) ribbon cable + HE10 connector NUMBER OF POSITIONS : 4 : 4 positions 6 : 6 positions OPTIONS : 1 : Positive common (without TTL) 2 : TTL/5V logic with 24 Vdc supply Connector SMA2.9 is equivalent to “K Connector®”, registered trademark of Anritsu This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products; we reserve the right to make any changes judged necess

Technical Data Sheet NON TERMINATED MULTIPORT SWITCHES TITANIUM Series SERIES SPnT Insertion Loss and Isolation : 26.5GHz model with SMA connector 40GHz model with SMA2.9 connector V.S.W.R : 26.5GHz model with SMA connector 40GHz model with SMA2.9 connector This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products; we reserve the right to...

Technical Data Sheet NON TERMINATED MULTIPORT SWITCHES TITANIUM Series SERIES SPnT ADDITIONAL SPECIFICATIONS This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products; we reserve the right to make any changes judged necessary.

Technical Data Sheet NON TERMINATED MULTIPORT SWITCHES TITANIUM Series SERIES SPnT ELECTRONIC POSITION INDICATORS The electronic position indicators utilise photo-MOS transistors which are driven by the mechanical position of the RF paths moving elements. The circuitry consists of a common which can be connected to an output corresponding to selected RF path. If one or several RF paths are closed, the corresponding indicators are connected to the common. The photo-MOS transistors are configured for AC and/or DC operation. The electronic position indicators require the supply (20 to 32 VDC) to...

Technical Data Sheet NON TERMINATED MULTIPORT SWITCHES TITANIUM Series DRIVING THE SWITCH : Type 7 : with TTL (option “2”) / without TTL (option “1”). Each RF path can be closed by applying Ground or TTL "High" for option 2 to the corresponding "drive" pin. In general, except for Make-Before-Break drive, all other RF paths are simultaneously opened by internal logic. Indicator Indicator Common Ind.l Ind.2 Ind.3 Ind.4 Ind.5 Ind.6 Open all paths Switch connector (16-Blue) Open all paths (15-Green) Common Ground (14-Yellow)Indicator Path 6 (13-0range)Drive Path 6 (12-Red) Indicator Path 5 (11-Brown)...

Technical Data Sheet NON TERMINATED MULTIPORT SWITCHES TITANIUM Series SERIES SPnT TYPICAL OUTLINE DRAWING SMA Connectors All dimensions are in inches/millimetres. Ways 1 and 4 are not connected for SP4T This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication, in the effort to improve our products; we reserve the right to make any changes judged necessary.

Technical Data Sheet NON TERMINATED MULTIPORT SWITCHES TITANIUM Series SERIES SPnT POWER RATING CHART This graph is based on the following conditions : - Ambient temperature : + 25°C - Sea level - V.S.W.R. : 1 and cold switching DERATING FACTOR VERSUS V.S.W.R. The average power input must be reduced for load V.S.W.R. above 1. This document contains proprietary information and such information shall not be disclosed to any third party for any purpose whatsoever or used for manufacturing purposes without prior written agreement from Radiall. The data defined in this document are given as an indication,...