PUE 7 MEASURING INDICATOR - 1 Pages

Add to MyMedicalExpo favorites
PUE 7 MEASURING INDICATOR

Catalog excerpts

PUE 7 MEASURING INDICATOR release date 10-03-2015 PUE 7 weighing indicators are intended for building industrial scales. It can be enclosed in a plastic or stainless steel housing for rack installations. It is equipped with a 5.7” colour graphic display with touch panel and membrane keypad. It also has installed two proximity detectors with programmable functionality. Two platforms can be connected to the indicator. As regards peripherals, following devices can be connected: barcode scanners, receipt and label printers, transponder card readers and typical PC equipment (keybord, mouse etc.). PUE 7 supports 1 weighing platform in standard version. Accessible software versions: standard (functions of labelling, counting pieces, checkweighing), one-stand control of prepackages, mass comparator, network version of prepackages control (KTP NET), vibrating batcher. 71 Interface communication Infrared proximity sensors Optional functions: - PRINT function - TARE function - sensor's sensitivity adjustment Ethernet RS 232 2×USB power supply RS 232 4in/4out Technical data: PUE 7 PUE 7/P (panel) plastic stainless steel IP 43 front IP 66/67, whole IP 32 2 120÷230VAC; 10÷15VDC 10÷15VDC 5,7" with touch panel 8 keys -10°C ÷ 40°C III 6 000 19,5 mV 3,25 µV 0,5 µV 80 1200 5V ARM 200 MHz RAM 64 MB, Flash 1 GB Windows CE 6.0 2 4 Metrological parameters as in main platform (option) 2×RS 232, 2×USB, Ethernet, 4in / 4out Housing IP rating Proximity sensors Power supply Display Keypad Operation Temperature OIML class Maximum number of verification intervals Maximum input signal increase Maximum voltage per verification interval Minimum voltage per verification interval Minimum tensometer impedance Maximum tensometer impedance Tensometer bridge excitation voltage Processor Memory Operation System Number of platforms Additional weighing platform module Interfaces PARAMETERS IN/OUT Type of IN/ OUT Wire cross-section Maximum switching current Maximum forward voltage Range of Control voltage Reed relay type NO 0,14 ÷ 0,5 mm RADWAG 26-600 Radom s 28 Bracka Street s POLAND s Phone: +48 48 3848800 s Fax: +48 48 3850010 s www.radwag.com s e-mail:ex

 Open the catalog to page 1

All RADWAG Balances & Scales catalogs and technical brochures

  1. AS-X2

    4 Pages

  2. AS-R2

    4 Pages

  3. IM01.EX

    6 Pages

  4. PIPETTES

    4 Pages

  5. Album Radwag

    242 Pages

  6. CHECKWEIGHERS

    16 Pages

  7. WPY SCALES

    4 Pages

  8. BABY SCALES

    1 Pages

  9. BED SCALES

    1 Pages

  10. BEAM SCALES

    2 Pages

  11. BEAM SCALES

    2 Pages

  12. RAMP SCALES

    2 Pages

  13. CHAIR SCALES

    1 Pages

  14. BED SCALES

    1 Pages

  15. Checkweigher

    16 Pages

Archived catalogs