WEIGHING MODULE MW-01
2Pages

{{requestButtons}}

Catalog excerpts

WEIGHING MODULE MW-01 - 1

Weighing module MW-01 has been designed, to meet ever growing needs of the market and customers. The module is intended for building industrial, load cell scales, where weighing platforms are located in significant distance from measuring indicator. Depending on the needs, communication with the module can be conducted via RS485, RS232, Ethernet, Profibus. Module MW-01 can cooperate with measuring indicators or PC. Weighing module MW-01 enables full operation of PLC programmable controllers, which communicate through communication protocol Modbus class 0. The weighing module in network utilizing Modbus standard operates as slave, on one of available interfaces, RS 485 or Ethernet. It operates in one of three modes: • RS484 - RTU, (hardware interface RS485, frame RTU), • TCP/IP - RTU, (hardware interface Ethernet, frame RTU), • TCP/IP - Open ModBus, (hardware interface Ethernet, frame Open Modbus). In weighing systems which may be supervised by master computer system thanks to communication realized via Ethernet interface Option of connecting a higher number of platforms to weighing indicators Application in checkweighers owing to high processing power of up to 1000 measurements per second Cooperation with industrial automation systems through implementation of communication protocol MODBUS Interface Casing OIML Class Working temperature IP rating Power supply Maximal quantity of verifying units Maximal increase of signal Minimal voltage on one verifying unit Impedance range of load cell Voltage on load cell Connection of load cell Quantity of platforms Speed of transmission Multi-range possibility Housing dimensions Number of IN / OUT PARAMETERS IN/OUT OUT 1 -i Type IN / OUT Wire gauge Maximum constant current switching Maximum forward voltage Control voltage range Read relay type NO Optoisolated

Open the catalog to page 1
WEIGHING MODULE MW-01 - 2

CONSTRUCTION: Weighing module features metal housing. Signal cables are mounted through a cable gland. Communication with external peripherals is realized through one of five interfaces: RS485, RS232, Ethernet, Profibus. The example application module MW-01 Possibility of using the module MW-01 SOFTWARE: Operation of weighing module is possible from a PC with the software "MW Manager". Program allows calibration of weighing module (i.e. determining: start mass, calibration coefficient, gravitational correction, linearity correction), mass readout, tarring, zeroing, filter settings. Download...

Open the catalog to page 2

All RADWAG Balances & Scales catalogs and technical brochures

  1. AS-X2

    4 Pages

  2. AS-R2

    4 Pages

  3. IM01.EX

    6 Pages

  4. PIPETTES

    4 Pages

  5. Album Radwag

    242 Pages

  6. CHECKWEIGHERS

    16 Pages

  7. WPY SCALES

    4 Pages

  8. BABY SCALES

    1 Pages

  9. BED SCALES

    1 Pages

  10. BEAM SCALES

    2 Pages

  11. BEAM SCALES

    2 Pages

  12. RAMP SCALES

    2 Pages

  13. CHAIR SCALES

    1 Pages

  14. BED SCALES

    1 Pages

  15. Checkweigher

    16 Pages

Archived catalogs