COLD FAT EXTRACTOR EF-6P
5Pages

Food analysis COLD FAT EXTRACTOR EF-6P ECONOMIC AND FAST EXTRACTIONS WITH MINIMUM EFFORT

INTENDED USE + DESIGNED FOR COLD FAT EXTRACTION PROCEDURES WITH ACETONE OR OTHER NON-POLAR ORGANIC SOLVENTS. + PRELIMINARY SAMPLE DEGREASING BEFORE HOT FIBRE EXTRACTION. FEATURES • Extraction system with 6 extraction places with 6 independent extraction valves. • External case made of AISI 304 stainless steel painted with epoxy resin. • Connection with integrated peristaltic pump with independent activation switch to apply negative pressure and accelerate extraction. • Integrated connection with F-6P equipment to apply positive pressure on the bottom of the sample, break compact clumps...

MAIN FEATURES OF OUR SOLUTION FOR FIBRE EXTRACTIONS Adjustable temperature regulation Integrated air pump to break compact clumps (positive pressure) External building made of stainless steel of high durability Water refrigeration circuit Pressure connection to F-6P to break compact clumps (positive pressure) External building made of stainless steel of high durability 6 Simultaneous extraction places 6 Simultaneous extraction places Individual 3 position valves • Drain • Closed • Pressure support Heating lid for a more homogeneous heat distribution Individual 3 position valves • Drain •...

2. Sample mixing with solvent at boiling temperature and 2. Sample mixing with solvent at room temperature. refrigeration circuit turned on. 3. Vacuum-assisted filtration with the integrated peristaltic 3. Vacuum-assisted filtration with the integrated peristaltic pump, solvent and residue can be recovered. pump, solvent can be recovered. During filtration, it may be necessary to break compact clumps During filtration, it may be necessary to break compact clumps using the integrated air pump. using F-6P's air pump connection. 4 COLD FAT EXTRACTION SYSTEM - EF-6P

International standardized methods External dimensions L x D x H mm Power W EF-6P cold fat extraction system is fabricated guaranteeing complicance with a variety of international standards such as AOAC, ISO, EPA and DIN. Maximum number of samples per test Dimensions of glass crucible Ø x H mm Warning It is recommended to use the equipment inside a fumes hood at all times while working with hazardous solvents. For some solvents, such as acetone, fumes hood is not necessary. In case of doubt, please contact us and our team will offer expert guidance. *Other voltages and electrical...