REA VeriCube Stand

Product catalog summary

Overview: The REA VeriCube Stand is a height-adjustable holder designed for the REA VeriCube, used in quality control for matrix and barcodes on directly marked parts in industries such as electronics, automotive, and unique device identification (UDI).

Purpose and Functionality: The stand addresses the challenge of positioning codes on complex 3D geometries at a 90° angle to the camera for accurate measurement. It ensures the code plane is consistently distanced from the camera and ideally centered in the camera's field of view.

Design and Features: The stand includes a thread spindle with a manual turn wheel for precise height adjustments, preventing movement without manual operation. It allows easy removal of the REA VeriCube for simpler measurements like labels or folded card boxes.

Specifications:

Height/Width/Length: 325 mm / 224 mm
Weight: 8.1 kg (without VeriCube)
Maximum part height: 664.6 mm

Applications: The stand is suitable for verifying codes on various 3D objects, including plastic parts, circuit boards, and surgical instruments. It can also be used with a diffuser and distance adapter for measuring folding boxes or labels.

Contact Information: REA Elektronik GmbH, Teichwiesenstrasse 1, 64367 Muehltal, Germany. Phone: +49 (0)6154 638-0, Email: [email protected], Website: www.rea-verifier.com

Catalog excerpts

Height-adjustable Stand for REA VeriCube QUALITY CONTROL DEVICES FOR MATRIX- AND BARCODES

Open the catalog to page 1

REA VeriCube Stand The REA VeriCube Stand is a height adjustable holder for the REA VeriCube. This is required for direct marked parts in e.g. electronic, automotive and unique device industries Identification (UDI) environment. Parts in these industries are directly marked by laser, inkjet or dot-peen processes. Typically the parts are having a more a less complex 3-dimensional geometry. This complex geometry makes it difficult to get the appropriate and correct position. The challenge is that for measurement always the code plane shall be orientated n a 90° angle to the camera. The distance...

Open the catalog to page 2

Stand solution for code verification on 3D objects REA VeriCube parallel underlay as distance gauge REA VeriCube with diffuser. The distance adapter is required for adjustment and calibration. It can also be used for measuring folding boxes or labels Weight: 8,1 kg (without VeriCube) Maximum part height : 664,6 mm

Open the catalog to page 3

REA VERIFIER j made in p Germany REA Elektronik GmbH Teichwiesenstrasse 1 64367 Muehltal Germany

Open the catalog to page 4

REA VeriCube Stand

REA VeriCube Stand

Catalog excerpts

All REA Elektronik GmbH catalogs and technical brochures