RETOMAT MINI Laboratory furnace Laboratory furnace Laboratory furnace Inset – EASY control panel Inset – EASY control panel Inset – COMFORT control panel • especially designed for precious and non-precious alloys and partial frameworks • with the basic, economical EASY controller the temperature is kept constant • temperature is distributed and stays even in the chamber • four-sided heating element • optimal chamber insulation Optional: • catalyst for reduction of odours and smoke through cathalytic afterburning of furnace gases • drawer tray for hot casting rings • COMFORT controller: precise temperature control with programmable parameters of temperature speed and hold times; up to 30 heating ramps, speed program and calendar function • heating rate of max. 15 °C / min. • maximum temperature of 1.150 °C • ventilation fan adapter • optimal insulation materials • upward opening stainless steel furnace door • stainless steel housing • insertable plate Technical data Line voltage Current consumption Line voltage Current consumption Line voltage Current consumption 530 mm  open: 610 mm heating room: 115 mm 550 mm  open: 660 mm heating room: 130 mm 570 mm  open: 710 mm heating room: 155 mm 450 mm open: 550 mm heating room: 150 mm 430 mm open: 500 mm heating room: 190 mm 520 mm open: 720 mm heating room: 250 mm Capacity Number of casting rings (recommendation) Weight Housing Capacity Number of casting rings (recommendation) Weight Housing Capacity Number of casting rings (recommendation) Weight Housing Recommendation For the RETOMAT furnaces we recommend the catalyst or the steam ventilator (see illustration on the right) as well as the casting ring drawer. For further information on these accessories please refer to www.reitel.com/images/pdfs/REITEL-cata